Join Us and become a Member for a Verified Badge to access private areas with the latest PS4 PKGs.
Today TheOfficialFloW aka theflow0 decided to publish PPPwn ahead of his Remote Vulnerabilities in SPP talk on CVE-2006-4304 (FreeBSD.org) at TyphoonCon 2024 next month, which is the first PlayStation 4 PPPoE (Point-to-Point Protocol over Ethernet) RCE (Remote Code Execution) Kernel Exploit supporting PS4 Firmware versions up to 11.00 OFW with @KIWIDOGGIE aka kd_tech_ passing along some 11.00 Offsets (Orbis110.hpp) that can help in reverse-engineering payloads crediting developer @Al Azif (fw_defines.h / payloads_1100_and_below.zip - 46.3 KB - includes ps4-app-dumper.bin, ps4-disable-updates.bin, ps4-fan-threshold.bin, ps4-ftp.bin, ps4-module-dumper.bin, ps4-permanent-uart.bin and ps4-todex.bin via @zecoxao aka notnotzecoxao) stage2.bin (11.2 KB) and additional payloads (module_dumper.bin - 10.7 KB, permanent_uart.bin - 6.84 KB, pup_decrypter.bin - 16.8 KB, update_blocker.bin - 5.48 KB - rename to payload.bin and put on USB) and Enable Debug Menu Settings and FPKG patches (stage2_10.00.bin - 10.9 KB, stage2_10.01.bin - 10.9 KB, stage2_11.00.bin - 10.9 KB - rename file to stage2.bin and put in the stage2 folder) via @LightningMods aka LightningMods_ with Pull Requests for Ports spanning 7.00, 7.01, 7.02, 7.50, 7.51, 7.55, 8.00, 8.01, 8.03, 8.50, 8.52, 9.00, 9.03, 9.04, 9.50, 9.51, 9.60, 10.00, 10.01, 10.50, 10.70, 10.71 and 11.00. :love:

While PS5 Firmware versions up to 8.20 OFW were confirmed as vulnerable to CVE-2006-4304 by theflow0 previously, according to @CrazyVoid on Twitter, "what flow released is for PS4. the PS5 is different then PS4, it might not be able to be exploited the same way" with @SpecterDev elaborating on Twitter, "Since I've seen a lot of ppl asking about it, theflow's latest RCE won't easily be adapted to PS5. PS4 is much weaker in terms of mitigations which played a part in allowing a remote exploit w/o userland code execution. PS5 is different. SMAP+CFI make this much harder to do."

He went on to state via Twitter, "XOM also plays a role, even if CFI were a non-issue, you can't easily get gadgets to ROP with either. It might not be impossible but a new strategy would be needed and you'd need to go for R/W. You'd also likely need userland code exec. I wouldn't expect anything soon.."

Download: PPPwn-master.zip / PPPwn GIT / stage2.7z (PPPwn Fork) (1.68 KB - includes stage2_9.00.bin and stage2_11.00.bin) / PPPwn GIT (Fork) via SiSTR0 for GoldHEN / 11.00 PS4 Payload Loader (PPPwn Fork) / PPPwn GIT (Fork) (includes PPPwn Stage2 PoC Payload Loader and PPPwn Test Payload, replace stage2.bin and put sample payload.bin on USB root) via @LightningMods aka LightningMods_ / PS4-9.00-11.00-PoC-bin-loader_v2.04.zip (101 KB - PPPwn working on Windows 10) / PS4 9.00 11.00 PoC Bin Loader GIT via @master s9 aka master_s9 / PPPwn_Windows_1x_beta02.7z (6.8 MB - includes stage1.bin / stage2.bin compiled for 9.00 / 11.00 - PPPwn Windows 1x Beta 02 PS4 9.00 / 11.00 Test) / PPPwn_v2.0.0.zip (409 KB - includes pppwn.exe) via master_s9 / kernel-dumper-main.zip (Kernel Dumper Payload to dump PS4 kernel on 11.00) / Kernel Dumper GIT via OBHQ (Obliteration) / PPPwnUI-release.zip / PPPwnUI GIT via B-Dem (Memz) / PS4_Toolset_2.3.zip (496.9 MB) via SAandTech / PPPwnGo-0514-2.zip (1.87 MB - includes PPPwnGo_v2.2.exe) / PPPwnGo GIT via PSGO aka rincol1015 / pppwn 1.7 GUI.zip (14.93 MB - includes PPPwn GUI 1.7.exe, requires npcap-1.79.exe) via @MODDEDWARFARE aka MODDED_WARFARE / PPPwn Exploit Runner FIX.zip (56.33 MB - includes PS4 PPPwn Exploit.exe) via SAandTech / ps4rootkit.py (PS4Rootkit PPPwn Exploit Automation Script for Ubuntu-based Linux Distros) via Crafttino21 / PPPwnLoader_v1.4_win64.zip (2.89 MB - includes PPPwn Loader.exe) / PPPwn Loader GIT via PokersKun (Junle Fong) / PPPwn-Android-master.zip / PPPwn Android GIT via Dark-life944 aka Dark_life944 / PPPwn-Android-App-main.zip / PPPwn Android App GIT via Dark_life944 / EZ.PPPwn-Bin-Loader.v1.00.by.DjPopol.zip (624 KB - EZ PPPwn-Bin-Loader v1.00) / Ez PPPwn GIT via DjPopol / PPPwnGUI release.zip (5.45 MB) / PPPwnGUI GIT (Fork) via n0201 aka n0201Git / PPPwn_cpp-main.zip (C++ rewrite of PPPwn) / PPPwn_cpp GIT via xfangfang aka rincol1015 / PPPwn-master.zip (Fork) / PPPwn GIT (Fork) via @oldschoolmodzhd aka OSM-Made aka LegendaryOSM

Spoiler: Depreciated

Here's further details from the PPPwn README.md: PPPwn - PlayStation 4 PPPoE RCE

PPPwn is a kernel remote code execution exploit for PlayStation 4 upto FW 11.00. This is a proof-of-concept exploit for CVE-2006-4304 that was reported responsibly to PlayStation.

Supported versions are:
  • FW 7.00 / 7.01 / 7.02
  • FW 7.50 / 7.51 / 7.55
  • FW 8.00 / 8.01 / 8.03
  • FW 8.50 / 8.52
  • FW 9.00
  • FW 9.03 / 9.04
  • FW 9.50 / 9.51 / 9.60
  • FW 10.00 / 10.01
  • FW 10.50 / 10.70 / 10.71
  • FW 11.00
  • more can be added (PRs are welcome)
The exploit only prints PPPwned on your PS4 as a proof-of-concept. In order to launch Mira or similar homebrew enablers, the stage2.bin payload needs to be adapted.

Requirements
  • Computer with Ethernet port
    • USB adapter also works
  • Ethernet cable
  • Linux
    • You can use VirtualBox to create a Linux VM with Bridged Adapter as network adapter to use the ethernet port in the VM.
  • Python3 and gcc installed
Usage

On your computer, clone the repository:
Code:
git clone --recursive https://github.com/TheOfficialFloW/PPPwn
Change the directory to the cloned repository:
Code:
cd PPPwn
Install the requirements:
Code:
sudo pip install -r requirements.txt
Compile the payloads:
Code:
make -C stage1 FW=1100 clean && make -C stage1 FW=1100
make -C stage2 FW=1100 clean && make -C stage2 FW=1100
For other firmwares, e.g. FW 9.00, pass FW=900.

Run the exploit (see ifconfig for the correct interface):
Code:
sudo python3 pppwn.py --interface=enp0s3 --fw=1100
For other firmwares, e.g. FW 9.00, pass --fw=900.

On your PS4:
  • Go to Settings and then Network
  • Select Set Up Internet connection and choose Use a LAN Cable
  • Choose Custom setup and choose PPPoE for IP Address Settings
  • Enter anything for PPPoE User ID and PPPoE Pasword
  • Choose Automatic for DNS Settings and MTU Settings
  • Choose Do Not Use for Proxy Server
  • Click Test Internet Connection to communicate with your computer
If the exploit fails or the PS4 crashes, you can skip the internet setup and simply click on Test Internet Connection. If the pppwn.py script is stuck waiting for a request/response, abort it and run it again on your computer, and then click on Test Internet Connection on your PS4.

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4.

Example run
Code:
[+] PPPwn - PlayStation 4 PPPoE RCE by theflow
[+] args: interface=enp0s3 fw=1100 stage1=stage1/stage1.bin stage2=stage2/stage2.bin

[+] STAGE 0: Initialization
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 07:ba:be:34:d6:ab
[+] AC cookie length: 0x4e0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[*] Waiting for interface to be ready...
[+] Target IPv6: fe80::2d9:d1ff:febc:83e4
[+] Heap grooming...done

[+] STAGE 1: Memory corruption
[+] Pinning to CPU 0...done
[*] Sending malicious LCP configure request...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[+] Scanning for corrupted object...found fe80::0fdf:4141:4141:4141

[+] STAGE 2: KASLR defeat
[*] Defeating KASLR...
[+] pppoe_softc_list: 0xffffffff884de578
[+] kaslr_offset: 0x3ffc000

[+] STAGE 3: Remote code execution
[*] Sending LCP terminate request...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 97:df:ea:86:ff:ff
[+] AC cookie length: 0x511
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Triggering code execution...
[*] Waiting for stage1 to resume...
[*] Sending PADT...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634be9200
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] AC cookie length: 0x0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...

[+] STAGE 4: Arbitrary payload execution
[*] Sending stage2 payload...
[+] Done!
Notes for Mac Apple Silicon Users (arm64 / aarch64)

The code will not compile on Apple Silicon and requires amd64 architecture. There is a workaround using docker which will build the bin files required. Clone this repository to your mac system, then from the repo folder run ./build-macarm.sh. This will build the binaries for PS4 FW 1100 and place the necessary files into the correct folders.

To build the binaries for a different version, i.e. 900, run the command as such: ./build-macarm.sh 900. Once built, copy this folder structure into the Linux VM and execute as instructed above.This has been tested using VMware Fusion 13.5.1, with the VM Guest as Ubuntu 24.04, and the host machine is MacOS 14.4.1

Notes for GoldHEN version

This loader only supports payloads with a kernel entrypoint.The custom version of stage2 first looks for the payload in the root directory of the USB drive, and if found, it is copied to the internal HDD at this path: /data/GoldHEN/payloads/goldhen.bin. The internal payload is then loaded and is no longer needed on the external USB drive.At the moment, only firmware versions 9.00 and 11.00 are supported. Soon, versions 10.00/10.01 will also be supported.

Reminder: All GoldHEN related issues, updates, etc go in the ongoing discussion topic for it:
Spoiler: Related Tweets, Videos, Opcode Offsets & ROPGadget Gadgets
PPPwn PlayStation 4 PPPoE RCE PS4 Kernel Exploit to 11.00 by TheOfficialFloW.jpg
 

Comments

Hello, has anyone encountered such a problem, my ps4 is stuck in defeating kaslr, I used the latest pppwn 1.6 gui and still the same .bin in usb, I tried everything and it didn't work even once.

Edit: I uninstalled the A/V and pppwn loaded the first time, so that must have been the problem
 
Nice! Mine is on the very first 9.00 done so I don't know if I should update it to the 11.00 or stay where I'm at. I have to go through a bunch of stuff before it is jailbroken every time. I have the OG and Slim both on it. Haven't touched my BO3 one or my Pro PS4 yet. My Pro is on 10.00.
 
I've been stuck on 9.6 FW since it came out, put auto downloads off and just been waiting +- 2 years and searching everyday for a new FW exploit. Happy it's working and finally I can join this community, Thanks
 
Back
Top