Category PS3 Jailbreaking       Thread starter PSXHAX       Start date Jan 25, 2018 at 9:21 AM       89,557       112            
Status
Not open for further replies.
Following their PS3Xploit 4.82 CFW on OFW, NOR / NAND Flash Writer & NOR Dumper update, the PS3Xploit Team of @bguerville, @esc0rtd3w, @smhabib and W released PS3Xploit Tools v2.0 which features improved NOR / NAND flash writers and dumpers to make things simpler to install PlayStation 3 CFW on 4.82 OFW consoles! (y)

Download: NOR_NAND_IDPS_dumper_release_2.0_PS3Xploit.zip / NOR_NAND_writer_release_2.0_PS3Xploit.zip / flash_482.hex (included in the Flash Writer 2.0 archive) MD5: d05be52f8d21700052fbd1fc0174acae) / minvercheck.zip / Self's PS3 Xploit Guide for 4.82 OFW

To quote from the changelog on their official site at PS3Xploit.com: Changelog v2.0
  • Freeze issues - Fixed
  • Occasional bad dumps - Fixed
  • No beeps & shutdown. Replaced by a graceful ROP chain exit & return to browser. This gives the opportunity to the user to dump after patching & validate the dump with littlebalup's py checker. As long as the user does not shutdown/restart, it's still possible to recover from bad patching.
  • Support for usb port 0,1,6 + sd/cf/ms cards.
  • Multi firmware support on all dumpers (4.10+) & DEX support on 4.81.
  • HDD editions for all dumpers & flash writer where a picture file placeholder is used for read/write operations.
  • Javascript refactoring for performance & efficiency.
  • ps3xploit.com will host the 2.0 update, no need for 3rd party sites.
Also from esc0rtd3w via PSX-Place on the latest revision: I will start this off with NO you can not jailbreak your PS3 SuperSlim Console's (seems to be a popular question), however that does not mean the Ps3Xploit Team (bguerville, esc0rtd3w, habib & W) still has not been hard at work, with this new release of Ps3Xploit v2.0.

In this release all the tools (IDPS Dumper, Flash Dumper & Flash Writer) have seen significant improvements and now performing the task such as installing a Custom Firmware on your 4.82 OFW PS3 (with flash writer) has been made even easier and very stable thanks to the team's new checks implemented and progression of the exploit.

The Flash and IDPS dumper are also much improved.

Included Tools
  • 4.XX IDPS DUMPER
  • 4.XX FLASH DUMPER (USB Edition)
  • 4.XX FLASH DUMPER (HDD Edition)
  • 4.82 NOR/NAND WRITER (USB Edition)
  • 4.82 NOR/NAND WRITER (HDD Edition)
Will this jailbreak my SuperSlim?
  • NO,The Flasher Writer Tool is not Supported on the SuperSlim and a some very late Slim models, Howeever, PS3Xploit has a strong possibility to eventually evolve into a HEN style exploit (that aspect will take some additional development.)
Which PS3Xploits Tools are Compatible with my PS3 Console?

:arrow: FAT

PS3 Fat.jpg

Check this sticker on the back of your PS3 to view your PS3 Model. Flash Writer Model Compatibility (PHAT):

  • A NAND
  • B NAND
  • C NAND
  • E NAND
  • G NAND
  • H NOR
  • J NOR
  • K NOR
  • L NOR
  • M NOR
  • P NOR
  • Q NOR
All DUMPER (FLASH/IDPS) & FLASH WRITER TOOLS are Supported for this model.

:arrow: Slim

PS3 Slim.jpg

Check this sticker on the back of your PS3 to view your PS3 Model.


***IMPORTANT***

You must pay very close attention to your PS3 SLIM Models depending on when the PS3 SLIM was manufactured will determine if your console can install CFW (Flasher Writer Compatibility).

For the 25XX series or even if your unsure about any of the models it is recommended you run the minverchk PUP >> (DOWNLOAD) & (How to use Minverchk) its a simply utility that show the factory installed firmware on your ps3 and for the CECH-25XX model if the utility shows 3.56 or lower you are compatible but if it shows 3.60 and higher that means your are NOT compatible to use the Flash Writer (CFW enabler for 4.82 CFW)
  • Flash Writer Model Compatibility (SLIM):
    • 20XX NOR
    • 21XX NOR
    • 25XX NOR (3.56 minver. and Lower)
  • NOT COMPATIBLE (SLIM):
    • 25XX NOR (3.60 and Higher)
    • 3XXX NOR
All DUMPER (FLASH/IDPS) TOOLS are Supported for this model.

:arrow: SuperSlim

PS3 SuperSlim.jpg


Check this sticker on the back of your PS3 to view your PS3 Model.
  • FLASH WRITER NOT COMPATIBLE (SUPERSLIM):
    • 4XXXA EMMC
    • 4XXXB NOR
    • 4XXXC NOR
All DUMPER (FLASH/IDPS) TOOLS are Supported for this model.

Warning: Known Limitation
  • Due to the lack of proper checks after exiting the ROP chain, it is possible in some cases to obtain a success message despite an operation failure. For instance, if you choose a path where no device is plugged in, a dumper page will still display a success message despite the fact the dump save could not work. This limitation has already been addressed, the added operation checks will be part of an update to these PS3Xploit tools which will be released in the coming weeks, that update will be final, no more will come after it.
:arrow: FLASH DUMPER TOOL

USB EDITION

PS3 4.xx NAND/NOR/EMMC FLASH DUMPER v2.0

  • All PS3 models supported
  • All 4.10+ CEX CFW/OFW supported
  • 4.81 DEX CFW/OFW supported
IMPORTANT NOTES:
  • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
  • So in short, never use the browser or use a homepage you cancel before running the exploit!
  • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.

    Steps:
    1. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
    2. Open the browser. The exploit page will load automatically. Choose your dump path option.
    3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
    4. Trigger the exploit by pressing the dump button.
    5. On success, validate your dump with the py checker tool.
HDD EDITION

PS3 4.xx NAND/NOR/EMMC FLASH DUMPER - HDD EDITION v2.0

  • All PS3 models supported
  • All 4.10+ CEX CFW/OFW supported
  • 4.81 DEX CFW/OFW supported
IMPORTANT NOTES:
  • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
  • So in short, never use the browser or use a homepage you cancel before running the exploit!
  • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
Steps:
  1. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
  2. Open the browser. The exploit page will load automatically. Download the dump.jpg placeholder file to your PS3 System Storage using the provided link as instructed on screen.
  3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
  4. Trigger the exploit by pressing the dump button.
  5. On success, retrieve the dump file from the PS3 XMB Photo section, rename it appropriately to dump.hex or whatever & validate your dump with the py checker tool.
Usage Tips:
  • Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
  • If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
  • If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.
:arrow: FLASH WRITER

USB EDITION

PS3 OFW 4.82 NAND/NOR FLASH WRITER v2.0

***** IMPORTANT DETAILS BELOW -- AVOIDING A BRICK *****
WARNING: USE ONLY THE PROVIDED flash_482.hex AS IS. DON'T PATCH IT OR MODIFY IT OR YOU WILL BRICK *****
  • Verify flash_482.hex file on a flash drive and in the selected USB slot!
    • flash_482.hex MD5: d05be52f8d21700052fbd1fc0174acae
  • DO NOT USE ON CFW (Custom Firmware) (Only Supports OFW)
  • DO NOT USE ON PS3 Models 3xxx/4xxx (aka late Slim or Superslim models), you would brick those consoles.
  • ON SLIM 2xxx Consoles, always use MinVerChck PUP to ensure that the minimum installable firmware version is < 3.60, if ever the minimum version is >3.56, using the flash writer would partially brick your console!
  • USE ONLY ON 4.82 OFW
IMPORTANT NOTES:
  • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to ps3 javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded due to previous browsing then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically..
  • So in short, never use the browser or use a homepage you cancel before running the exploit!
  • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
Steps:
For best results with flash writer, here are the recommended steps.
  1. Install OFW 4.82 twice on the console you wish to flash to avoid the potential corruption error during CFW installation.
  2. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
  3. Open the browser. The exploit page will load automatically. Choose your path option.
  4. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
  5. Trigger the exploit by pressing the patch button.
  6. On success, load the ps3xploit.com flash dumper, dump the flash memory & validate it with py checker tool. Do NOT restart the console if ever the validation tool gives you errors/warnings or you risk to partially brick your console. Report your problem instead.
  7. When you are satisfied with the dump validation, restart your console & install a 4.82 CFW.
HDD EDITION

PS3 OFW 4.82 NAND/NOR FLASH WRITER - HDD EDITION v2.0

***** IMPORTANT DETAILS BELOW -- AVOIDING A BRICK *****
WARNING: USE ONLY THE PROVIDED flash_482.jpg AS IS. DON'T PATCH IT OR MODIFY IT OR YOU WILL BRICK *****
  • Download flash_482.jpg file to PS3 System Storage!
    • flash_482.jpg MD5: d05be52f8d21700052fbd1fc0174acae
  • DO NOT USE ON CFW (Custom Firmware) (Only Supports OFW)
  • DO NOT USE ON PS3 Models 3xxx/4xxx (aka SuperSlims / Late Slim models), you would brick those consoles.
  • ON SLIM 2xxx Consoles, always use MinVerChck PUP to ensure that the minimum installable firmware version is < 3.60, if ever the minimum version is >3.56, using the flash writer would partially brick your console!
  • USE ONLY ON 4.82 OFW
IMPORTANT NOTES:
  • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to ps3 javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded due to previous browsing then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically..
  • So in short, never use the browser or use a homepage you cancel before running the exploit!
  • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
Steps:
For best results with flash writer, here are the recommended steps.
  1. Install OFW 4.82 twice on the console you wish to flash to avoid the potential corruption error during CFW installation.
  2. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
  3. Open the browser. The exploit page will load automatically. Download the patch file flash_482.jpg to your PS3 System Storage using the provided link on screen.
  4. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
  5. Trigger the exploit by pressing the patch button.
  6. On success, load the ps3xploit.com flash dumper, dump the flash memory & validate it with py checker tool. Do NOT restart the console if ever the validation tool gives you errors/warnings or you risk to partially brick your console. Report your problem instead.
  7. When you are satisfied with the dump validation, restart your console & install a 4.82 CFW.
Usage Tips:
  • Try using a LAN connection or a solid WiFi connection during exploitation. A weak signal can cause problems.
  • If the exploit takes more than 5 minutes to work, reload page, browser, or restart console and try again.
  • If you are using a LAN connection and experience network issues, make sure all cables to router are in working order.
IDPS DUMPER

PS3 4.xx IDPS DUMPER v2.0

  • All PS3 models supported
  • All 4.10+ CEX CFW/OFW supported
  • 4.81 DEX CFW/OFW supported
IMPORTANT NOTES:
  • It's essential not to flood the browser memory with junk before running the exploit. The reason for this is that due to javascript core memory usage limitations we are scanning several times a small range of browser memory (a few Mb) to find some essential data in RAM, if the memory is flooded then the range to scan becomes much larger & the probabilities that our data is found in the smaller range decrease dramatically....
  • So in short, never use the browser or use a homepage you cancel before running the exploit!
  • It is recommended to set your homepage temporarily to the exploit page you wish to use to ensure there is no memory flooding messing with the exploit initialization stage.
Steps:
  1. Open the browser & browse to the ps3xploit.com website, go to the page of the exploit you need. Set the current page as browser homepage. Don't launch the exploit initialization. Close the browser.
  2. Open the browser. The exploit page will load automatically. Choose your dump path option.
  3. Press the exploit initialization button & wait until initialization succeeds. If it fails, follow the refresh/reload instructions on screen.
  4. Trigger the exploit by pressing the dump button.
  5. On success, check your idps dump with an hex editor.
PS3Xploit Tools v2.0 to Install PS3 CFW on 4.82 OFW Consoles.jpg
 

Comments

Status
Not open for further replies.

mitrut0123

Contributor
No! Read the thread! This is the beginning state of this exploit, after some more time put by the developers it will enable 3k and 4k ps3 users to launch homebrew. In short, you'll have to wait some more.
 

Boloul

[email protected]
Member
Contributor
he said to you in the upper of the topic this popular question has been answerd million of time no you cannot jailbreak or install cfw on 3xxx and super slim 4xxx
 
Status
Not open for further replies.
Recent Articles
Stickman Zombie Attack PS4 Homebrew Game PKG by Med33
After a lot of work, I'm announcing Stickman Zombie Attack homebrew game PKG made with Unity for the PS4. 🧟‍♂️🧟‍♀️ Thanks to all the beta testers @jwooh, @DEFAULTDNB and @FFTHEWINNER they helped...
Free-to-Play Action RPG Dauntless Slashes Onto PS4 Tomorrow
Reminiscent of Fortnite, the Behemoth-slaying co-op action RPG Dauntless slashes onto PS4 tomorrow, is free-to-play and offers exclusive cosmetic gear for PS Plus members. 😀 Here's more on...
PS4Modding.net: PS4 Cheats and Modding Platform Trainers with Tools
Since the release of PS4 Reaper (debugger and trainer maker) the goal was to gather modders and gamers around one passion. Today we've come along way: 3 Universal Trainers (PC, Android, iOS)...
Orbis MSX Super Laydock: Mission Striker PS4 Homebrew PKG
Proceeding the MSXORBIS MSX Core from BigBoss and recent Resident Evil CODE: Vita PS4 homebrew game in development by @Markus95, this weekend @oneman123 shared on Twitter a shoot 'em up Orbis MSX...
Top