Join Us and become a Member for a Verified Badge on Discord to access private areas with the latest PS4 FPKGs.
Category PS4 Jailbreaking       Thread starter Zoilus       Start date Sep 3, 2018 at 2:39 PM       36,742       59            
OK FINALLY did a pretty BIG update. Self Host is now updated to v3.0b followed by v3.1 and the ESP8266 version is updated to v2.7 firmware only and v2.7 complete with lots of stuff added.

Github for Full host version:
Github for ESP8266 Version:
From the KMZoilus KMZ505KEX Playground v3.0b Update
  1. Fixed - ApptoUSB v3.0
  2. Fixed - HEN + Bin Loader
  3. Added - Vortex Hen + VR
  4. Added - USB FPKG v1.1
  5. Added - BO3 Online
  6. Added - DB Restore v2.0 and DB Restore UNDO v2.0
  7. Added - GTA Menus page
  8. Added - All of the following GTA V menus:
    • Arabic Guy V1.1 for GTA on V1.00
    • Lamance v0.8 for GTA on update v1.27
    • Last Team Standing v1.0 (LTS) for GTA on update v1.27
    • NotAnotherMenu v0.2b for GTA on update v1.27
    • NotyourDopes v1.0 for GTA on update v1.27
    • WildeModz v1.2 for GTA on update v1.27
  9. Made various tweaks and changes to info & description page, layout, icons...etc
And from the KMZoilus KMZ_505_ESP8266 Arduino ESP8266 mini board version UPDATE v2.7
  1. Fixed - ApptoUSB v3.0
  2. Fixed - HEN + Bin Loader
  3. Added - Vortex Hen + VR
  4. Added - BO3 Online
  5. Added - DB Restore v2.0 and DB Restore UNDO v2.0
  6. Other various tweaks and changes and updated info & description page
Set up instructions - (nodeMCU pyFlasher 3.0)
  1. Download latest from here:

  2. Install, then Run

  3. Plug in your ESP board. You can hold down flash button as you plug it in but its not needed with this program

  4. Choose correct com port, browse location for wherever you put the "bin" files you download from here and select. Firmware_only.bin is just the admin firmware, after installing you can log in and via browser on your device upload any files (self host) you want. Complete.bin installs the firmware AND the KM.Z Exploit (you can always delete the files later and or add to them)

  5. Set baud rate to: 115200, Flashmode to: Dual I/O (DIO), and "yes, wipe all data", then press "flash nodeMCU" this ONLY flashes the main firmware/sketch to the ESP. When its done it will say so. unplug the ESP then plug it to any powered usb source (even the ps4), after plugging it in, press and hold "reset" on the esp for like 3 seconds, let go and wait a few seconds.

  6. Use any wifi device with browser , log into the ESP using credentials at top of this page, then in device's browser type: "" without quotes, you should see the admin page of the ESP.

  7. If you uploaded the "complete.bin" go to "main page" and the exploit should load. If you only did firmware, then it will have a plain payloads page loaded until you up load proper files using the file manager.
How to use once fully flashed
  1. Plug ESP to ANY usb power sorce (doesn't have to be PS4), go to network, set up internet connect, custom, PS4_KMZ_ESP, password is password , set everything to automatic. Done, go to user guide and the 5.05 exploit's playground main index page should open if you used the "complete.bin" or if you've upload your own self host files proper.

  2. After you run Vortex HEN once, your browser will be permanently enabled. I also suggest you run "update blocker". At this point you should reboot ps4.
If after reboot you don't see browser on home screen, go to the "library" section of the ps4 on main screen all the way to the right, look for the browser and start it, close it , it should now be on your home screen from now on.

Also to access the exploit once browser is enabled, just type (or ANY address) and the browser will always default to your ESP Exploit index page. Of course this is only when the ps4 is connected to the esp via WIFI. You can now bookmark that page

Whenever you run the admin option from the ps4 many options will not function and just kick back errors BUT you can change the "config editor" from the ps4, changes will happen immediately though!

You can access the "admin" of your ESP from any browser as long as that device is connected via wifi to the ESP. You can type or just (or ANY site) on the browser then pick the Admin panel from the exploit.

When on the PS4 if you are running ADMIN I would suggest BEFORE you run a payload or exploit , that you do it from the MAIN Exploit's Playground Index page and NOT from the Admin's "main page" located in the little upper left window. Exploits should still work fine but it may cause less of a problem that way.

For more info on exploit go to:

Many thanks to ALL devs involved in all PS4 projects and Stooged and KiiWii in particular!

Full self host version (latest):
PS4 v5.05 Self Host & ESP8266 Exploit Playground Updates by Zoilus.jpg

PS4 v5.05 Self Host & ESP8266 Exploit Playground Updates by Zoilus 2.jpg

ESP8266 Version (latest):
PS4 v5.05 Self Host & ESP8266 Exploit Playground Updates by Zoilus 3.jpg



Senior Member
Awesome! This is what I use on my PS4! Love the layout and it has all the options I could ever Want! Is there a possibility to add 'make offline cache'?


Staff Member
Cheers for all the updates @Zoilus, I've locked the old thread and will mainpage this new one as our ongoing discussion until the next major round of changes. :love:


Senior Member
@lestasmsc @acad222 - Thanks! and i don't think I will be doing cache as it requires time that i don't have. Plus i personally don't use that method at all.... even modded warfare recommended using something else, in the tutorial he did. I use a junkie phone off of ebay that i paid $19 for and is a server for, ps4, ps3, music... etc

That being said, everything here in this exploit is set up (on purpose) in a pretty easy way , so people can edit, add, delete... make their own... whatever, without you having to be an honorary graduate of M.I.T in order to understand it. ;) so maybe someone will do the cache thing, they're more than welcome too, my time , now that the holiday season is just about here is really almost non-existent

@PSXHAX - thanks! (y)

Everyone - there are still a couple of things like the HEN+Binloader that are a work in progress... that one seems to work on some systems better than others, if it don't work for you and you get KP, just do it the old fashion way and do bin loader first then hen... but almost everything else here is pretty solid!


Senior Member
Would be great if the caching was implemented.
That have said, the last time i cached HEN from Al Azzif's dns it isnt working anymore in rest mode. Exploit needs to be activated again when waking up.

Anyone else experienced the same? Its not the ps4.. i have multiple consoles with the same issue.
Recent Articles
PS5 DualSense Controller Close-up and Teardown Images Surface
Proceeding the PS5 DualSense initial unveiling, confirmation of Updatable Controller Software, some Black PS5 DualSense Prototype images, a third-party 24K Gold Version and pictures with pricing...
Call of Duty: Modern Warfare and Warzone Season 6 PS4 Trailer, Details
Earlier this month the Call of Duty: Black Ops Cold War PS4 Alpha went live, and today Activision returns with a Call of Duty: Modern Warfare and Warzone Season 6 PS4 Trailer detailing the new...
MiraTempReport: Mira Temperature Reports PS4 Payload via Notifications
We've covered PS4 Pro Fan Noise Testing, a PS4 Fan Booster Payload and some PS4 Fan Control Payloads to adjust the PlayStation 4 fan speed and temperature... with the latest MiraTempReport PS4...
CGFw: Check Game Firmware App for Required PS4 Version by OfficialAhmed
Following the FRMCHK Web Database to identify PS4 games in Firmware groups and his previous ThemeDumperFTP release, today PlayStation 4 developer OfficialAhmed made available on Twitter an...