PS4ADMIN (Firmware V3) for ESP8266 by RetroGamer74

Hi guys, as many of you know I was pending to release the firmware v3 for ESP8266 following my last update. It was a bit difficult but I got here.

You can get it directly from the GitHub repository: retrogamerfirmv3.bin

You can also take a look to the demo preview, and from the README.md file: Firmware V3 (PS4ADMIN) for chip ESP8266 including PS4 4.55 Exploits

Firmware for chip ESP8266 including PS4 4.55 Exploits

This firmware includes next payloads: AppToUSB, Original (Payload Injections 9020 Port), HEN, HEN-VR, DUMPER, BACKUP, FTP, Enable Browser, Block FW Updates, Unblock FW Updates, Arabic Guy v1.0 GTA V ModMenu, WildeModz v.1.1 GTA V ModMenu, Lamance v.0.7 GTA V ModMenu.

English Installation Instructions

Download the ZIP package of this repository

Use retrogamerfirmv3.bin if you want firmware in english language.

Flash ESP8266 firmware using next flasher.

You can flash the firmware using Windows x86, Windows x86_64, or MacOSX.

https://github.com/marcelstoer/nodemcu-pyflasher/releases/tag/v3.0

Once running PS4:

• Settings -> Networking setup.
• Choose option Customized.
• Select WiFi network identified by PS4Wifi. ( Password not required )
• Select Automatic IP.
• DNS IP, Set values for Primary and Secondary DNS to: 10.10.10.1
• Set next options to their default values, until you reach the end of the networking setup.
• Finally go to the Users Guide, in the Settings. The website installed into ESP8266 firmware will be shown. Ver: 1.0

Credits

qwertyoruiop, specter dev, flatz

• Al Azif GitHub
• APPtoUSB v15
• DB-SG Backup
• Dumper-XVortex v1.7
• FTP-XVortex v1.2
• HEN-XVortex v1.4
• HEN-VR
• Enable Browser
• PKG2USB v1
• Original (Port 9020)
• Update Blocker
• Uninstall Update Blocker

Enjoy!!

Setting Up ESP8266 For PS4 (Quick & Dirty) via MasterTurkey

PS4 WiFi AP with i2c display

Portable PS4 Jailbreak (ESP8266 In An SMS Cart) via MasterTurkey

 

[Allenz12]

Que hay PARA BO3

 

[RetroGamer74]

@seanp2500 Hi seanp2500. Usually payloads are static built and it can not be customized unless you do the modifications before to compile and build it.

To use AppToUsb for example you have to setup a file AppToUSB.ini externally. With this way you can send parameters to the payload before the payload injection. I don't know if I can explain it well. I'm not very good in english

 

[petrik16]

Thank you for this latest version!

 

[5u770n]

Do you have any plans on releasing the full source .ino for this project?

 

[edupt]

Awesome job with this m8, ill be waiting for the 8266 version update but take your time making it great again.

 

[genius312]

thank you for your wonderful job !!!
1 issue tho.
i first used the exploit with dns changed while connected to my local lan and i had no issue.
then switch to esp8266 exploit and i had this issue.
now switch to your v3 and same issue.
i cannot wake the ps4 from rest mode, i need to unplug the power cord if i go I rest mode.
this never happened with the dns exploit... maybe the esp is using to much power ?

thank you again for your work!!

 

[MasterTurkey]

esp uses 5v if I'm correct. So I doubt that's your issue. I'm willing to bet a controller plugged in would be more than 5v and I've never had that issue before.

 

[screamodude]

Can this be used on 4.05? or only 4.55

 

[kyilintun]

Very Nice
Thank You So Much

 

[seanp2500]

@genius312 check power settings specifically usb