PS4ADMIN (Firmware V3) for ESP8266 by RetroGamer74

Hi guys, as many of you know I was pending to release the firmware v3 for ESP8266 following my last update. It was a bit difficult but I got here.

You can get it directly from the GitHub repository: retrogamerfirmv3.bin

You can also take a look to the demo preview, and from the README.md file: Firmware V3 (PS4ADMIN) for chip ESP8266 including PS4 4.55 Exploits

Firmware for chip ESP8266 including PS4 4.55 Exploits

This firmware includes next payloads: AppToUSB, Original (Payload Injections 9020 Port), HEN, HEN-VR, DUMPER, BACKUP, FTP, Enable Browser, Block FW Updates, Unblock FW Updates, Arabic Guy v1.0 GTA V ModMenu, WildeModz v.1.1 GTA V ModMenu, Lamance v.0.7 GTA V ModMenu.

English Installation Instructions

Download the ZIP package of this repository

Use retrogamerfirmv3.bin if you want firmware in english language.

Flash ESP8266 firmware using next flasher.

You can flash the firmware using Windows x86, Windows x86_64, or MacOSX.

https://github.com/marcelstoer/nodemcu-pyflasher/releases/tag/v3.0

Once running PS4:

• Settings -> Networking setup.
• Choose option Customized.
• Select WiFi network identified by PS4Wifi. ( Password not required )
• Select Automatic IP.
• DNS IP, Set values for Primary and Secondary DNS to: 10.10.10.1
• Set next options to their default values, until you reach the end of the networking setup.
• Finally go to the Users Guide, in the Settings. The website installed into ESP8266 firmware will be shown. Ver: 1.0

Credits

qwertyoruiop, specter dev, flatz

• Al Azif GitHub
• APPtoUSB v15
• DB-SG Backup
• Dumper-XVortex v1.7
• FTP-XVortex v1.2
• HEN-XVortex v1.4
• HEN-VR
• Enable Browser
• PKG2USB v1
• Original (Port 9020)
• Update Blocker
• Uninstall Update Blocker

Enjoy!!

Setting Up ESP8266 For PS4 (Quick & Dirty) via MasterTurkey

PS4 WiFi AP with i2c display

Portable PS4 Jailbreak (ESP8266 In An SMS Cart) via MasterTurkey

 

[Keeperdy]

@RetroGamer74
Hi, is BackUp by Stooged in your firmware on JavaScript (index.html; kernel.js; payload.js etc)? I'm making my own firmware for myself - light version, only basic payloads, but running BackUp always gets "Not enough memory" via guidance. If I use browser - it's OK! The same problem is on many firmwares I tried, but not with yours!!! Can you help me? Thanks!!!

 

[UnknowGamer]

@RetroGamer74 updated esp to retrogamerfirmv3_rc1 and i find it loading slower in user guide and browser. and had to wait 2 mins for it to load chip settings and change the default language from Spanish to English. and just selecting other options on menu take a bit of time to load. i dont know if its a bad flash. will re try.

 

[muxi]

@RetroGamer74 Hi, I would have an improvement suggestion for your firmware V3:

To load a payload with the V3 you need 4 steps at this time (category payload exploit launch). It would be much more convenient to directly load the payloads via a sidescrolling menu, controlled by the directional buttos. To make the whole thing clearer, you could arrange the categories on top of each other, such as the OneMenu for the PSVita.

 

[MasterTurkey]

This driver (CP210x_Universal_Windows_Driver.zip) worked for my elecrow. Windows 10, x64 universal driver.

Look ma, no hands!

​

Not finished yet. Mock up to see if everything worked, flashed etc. Will solder wires and find a suitable housing for it. Possibly get a bigger battery. Board supports battery charging, so no need for a second battery charging board etc.

​

Soldered the connections removing the wire nuts. Taped them up (cus I don't have any shrink wrap it's in storage) and then mocked up using tape. I'll prob glue when I'm good and ready. I'll run a 4" micro usb to usb out the cart slot for charging and see about tucking it (hence the 4") into the slot so it still looks like an ordinary cart.

Portable PS4 jailbreak.

 

[JakeyWineBottle]

@RetroGamer74 does cod3 cheat work ? the gta5 lamance works ok but cant get anything from the cod3 menu