PS4 EAP Kernel Dumps & Standalone PS4 Exploit Host RPi Installer

Following the PS4 Rest Mode REcon Demo and Slideshow PDF of Volodymyr Pikhur's presentation comes some PS4 EAP Kernels from 1.01, 1.76 and 4.05 OFW via notzecoxao for developers alongside a Standalone RPi installer for PS4 Exploit Host (no router, no switch) by @Al Azif who's currently working on improving it further with wifi and by eliminating the PS4 to change settings.

Download: eap_kernel_101.bin / eap_kernel_176.bin / EAP Kernels.zip (8.31 MB - Mirror) / EAP Kernels.zip (Mirror #2) / RPi Installer for 4.55 / PiXploitHost GIT / PS4-EAP-KEY-DUMPER-672.bin (6.6 KB)

Below are some related Tweets including a PS2Reality MediaPlayer (PS2 Emulation) PS4 demo video from BigBoss, and to quote from the README.md: Standalone RPi installer for ps4-exploit-host (No router, no switch)

1. Have a fresh install of Raspiban Lite on your RPi
2. Connect you RPi to a network with internet access
3. Run this command on you RPi:
   

   `curl -L https://goo.gl/4bvW9P | sudo bash -s`

4. Your device will restart automatically
5. Run an ethernet cord directly between RPi and PS4
6. On the PS4 setup the network as follows:
   • Set Up Internet Connection
   • Use a LAN Cable
   • Custom
   • Manual
     • IP Address: 7.7.7.8
     • Subnet Mask: 255.255.255.0
     • Default Gateway: 7.7.7.7
     • Primary DNS: 7.7.7.7
     • Secondary DNS: 7.7.7.7
   • Automatic
   • Do Not Use
7. Load the User's Manual

Github: https://github.com/c0d3m4st4/PiXploitHost / Spanish Guide

EAP Internal Partition Key is at kernel_base + 0x258CCD0 on 4.55 kernel
Cheers to both @oneman123 and @SSShowmik for the heads-up in the PSXHAX Shoutbox earlier today!

 

[bjorno]

whats the cheapest raspberry pi I could buy?

I think the prices are kind of similar for the models depending on where you live. But if you are going to get one, why don't you get the Pi 3 model B which is their current (3rd) generation Pi.

 

[djcopey]

The alternative I found was to set my phone up as a server to host the exploit and set my phone as an access point, then you can just connect to your phone wirelessly and access the exploit. On a side note you need to have enabled the web browser.

 

[Ashford]

Pi Zero is the cheaper.

 

[Fernandez]

The very first Raspberry Pi should be enough for that, but if you want it dirt cheap, you could use RPi Zero W (which is about 10 GBP I think) and instead of using an ethernet cord you could setup your RPi as an ad-hoc wifi network. It's probably a little more complicated that downloading and executing a bash script, but it's doable. I've got my home automation (homebridge + homeassistant), an instagram API bot and a GPIO christmas light controller set up on Raspberry Pi Zero W and it runs flawlessly.

Be aware that you need to have a usb wifi dongle for that though, as it only natively supports a micro-USB connection and is a little of a female dog to setup without a monitor.

 

[behnamzed]

Is this for 4.05 or 1.76???

 

[PSXHAX]

The RPi Installer is for 4.05 OFW.

 

[M0r0ccaNSiLeNT]

Nice ! Finally I can get use of my RPi !

 

[bluemeanie23]

Been trying the pi method for a while now not having much luck. the script runs starts to download the exploit files then randomly disconnects and just sits there. ive tried 2 different pis and a few different sd cards. Will try again tommorow

 

[jwooh]

Do we need to use a standard ethernet cord or does it need to be a cross over cable?

 

[FFTHEWINNER]

In the comments, Smug Nia mentions that they obtained the kernels "a long time ago". i guess that means it isnt related to the Presentation.