Yesterday we saw a
Cyber Save Editor Translated Guide, and today I posted this tutorial over on
NGU and also below for those interested here.
Like many of you guys out there, I too was extremely disappointed in learning that the recent save editor released by Cyber Gadget was
patched in the latest
PS4 Firmware 4.50.
I did some examining of what exactly happens when you copy a save from a 4.50 system. Basically two errors occur. If you the save you are using is on a lower FW than 4.50 (backup from a USB, or off the Internet) the system won't allow you to copy it onto itself or use it unless the original from the console itself it up-to-date and then copied over. And if you copy a save from 4.50 onto a USB drive it appears as corrupted on a firmware below it.
So this gave me an idea, what if the system update isn't exactly the one that's preventing the save from not working? After some testing, I have concluded that the latest Firmware introduced a save patching system that only gets applied during USB Copying. Notice the key here is USB COPYING, meaning I have found a bypass to this.
*Down below you will find a guide that will allow you to continue to use the save Editor, but to keep in mind this will only be available to a limited amount of users due to the process of achieving it.
Requirements:
- PSProxy from Red-EyeX32
- TWO PS4 *This right here is where I said it would be limited to how many people can actually do this, though if you have been following the scene you may already have two consoles. I had my PRo on 4.50, and my old one on 4.07
- PlayStation Plus THIS IS A REQUIREMENT
So how does this work? Well after you have followed the PSProxy guide above, you will have your lower FW console that is capable with the save editor being able to go online. You can't download games unless you turn the proxy off, but you can however...
