Android App to Host PS4 5.05 Exploit and Payloads by Stooged

This is an update to my Android app to host the PS4 5.0X exploit and payloads.

This initial release just contains the 3 main payloads.

To use it you have to setup a wifi hotspot with your phone/tablet and connect the PS4 to that hotspot or connect the phone/tablet to the same network the PS4 is on.

Then install the app and open it and at the top will be the address you need to connect to with the PS4.

Your device might ask you about installing an application from "unknown sources" this is ok to allow, it just means its not coming from Google Play.

You just select the payload you want to run in the app and then use the PS4 to goto the address that you see in the app.

To change the payload just select it in the app and then use the ps4 to revisit/refresh the address again.

you can add more payloads to the app you just plug your phone into your computer and copy any payload BIN file you like into the PS4_50X_Payloads directory.

you will get one "There is not enough free system memory" because that's how this exploit works, just click ok and the page should reload and load the selected payload.

Download:

ps4_serve3_v2_3.zip / GIT

Spoiler: Depreciated

Eye candy:

Install GTA 5 mod menu 5.05 PS4 with android app, wildemodz

 

[stooged]

@Rayluc

Yes its working

 

[Rayluc]

@stooged Any ideas why then pkg on the internal hard is not getting deleted when I run the apptousb payload?

 

[stooged]

unplug the usb hdd and go look for the pkg on the internal drive.

 

[wolfpacleader86]

So, if I want to load the APP2USB payload, do I just load MIRA on the Al-Azif website under User Guide and when I get the "You're All Set", then send over the payload?

 

[Iaytblu]

how about the games installed using 4.55, do they work with this payload on 5.05?

 

[Herlaann]

I'm using ps4 fat 1206 with 5.05, when i start ps4serve, it usually gave me an IP address starting with 10 (example 10.xxx.xxx) and the HEN will not run. After restarting my connection data many times, i get an IP address starting with 192 (example 192.xxx.xxx), only then the HEN will run. Any solution? It's so difficult to keep restarting until i get 192

 

[stooged]

Ps4serve displays the current ip of the device its running on so if you have no hotspot enabled and no lan (wifi) connection it will display the wan ip which is your internet ip.

You can disable mobile data to make sure it never displays the wan ip.

There are 2 ways to setup ps4serve

1: You can setup a hotspot and connect the ps4 directly to the phone/device

2: You can connect both the ps4 and phone/device to the same wifi access point like your home wifi/modem/router

 

[Shadi Ahmed]

thanks a lot

 

[said31]

why when i run mira nothing happen?

 

[carlosc040]

Why my PS4 turn off when i active the HEN by Android offline?