PS4 EAP Kernel Dumps & Standalone PS4 Exploit Host RPi Installer

Following the PS4 Rest Mode REcon Demo and Slideshow PDF of Volodymyr Pikhur's presentation comes some PS4 EAP Kernels from 1.01, 1.76 and 4.05 OFW via notzecoxao for developers alongside a Standalone RPi installer for PS4 Exploit Host (no router, no switch) by @Al Azif who's currently working on improving it further with wifi and by eliminating the PS4 to change settings.

Download: eap_kernel_101.bin / eap_kernel_176.bin / EAP Kernels.zip (8.31 MB - Mirror) / EAP Kernels.zip (Mirror #2) / RPi Installer for 4.55 / PiXploitHost GIT / PS4-EAP-KEY-DUMPER-672.bin (6.6 KB)

Below are some related Tweets including a PS2Reality MediaPlayer (PS2 Emulation) PS4 demo video from BigBoss, and to quote from the README.md: Standalone RPi installer for ps4-exploit-host (No router, no switch)

1. Have a fresh install of Raspiban Lite on your RPi
2. Connect you RPi to a network with internet access
3. Run this command on you RPi:
   

   `curl -L https://goo.gl/4bvW9P | sudo bash -s`

4. Your device will restart automatically
5. Run an ethernet cord directly between RPi and PS4
6. On the PS4 setup the network as follows:
   • Set Up Internet Connection
   • Use a LAN Cable
   • Custom
   • Manual
     • IP Address: 7.7.7.8
     • Subnet Mask: 255.255.255.0
     • Default Gateway: 7.7.7.7
     • Primary DNS: 7.7.7.7
     • Secondary DNS: 7.7.7.7
   • Automatic
   • Do Not Use
7. Load the User's Manual

Github: https://github.com/c0d3m4st4/PiXploitHost / Spanish Guide

EAP Internal Partition Key is at kernel_base + 0x258CCD0 on 4.55 kernel
Cheers to both @oneman123 and @SSShowmik for the heads-up in the PSXHAX Shoutbox earlier today!

 

[bombob]

for now its compatible with all the Pi with a physical Ethernet port but for the others like Pi Zero/W u need a usb to rj45 dongle. But the OP promised to cook one that uses wifi AP for the W model

 

[teuira]

that's wonderful !
@bombob thanks for the quick answer. let's work it out

 

[Mwhite22]

I don't have too much experience setting up raspberry pi honestly as I just received one, put it off for a while, always wanted to mess with it, this gave me reason. I ran the command correctly in the terminal and it says 100 twice in 2 rows and a bunch of other stuff to the right of that, looks like it completed, but my pi never restarts. Anyone have any more in depth information on how this is supposed to work? Any help would be appreciated.

Thanks in advance.

 

[corsasri]

Can any one supply a working link as there all dead.

 

[MadBob]

We now have a working PI Zero W as an Access Point / Web-enabled host for PS4HEN (this means you can connect via wifi to the PI).

You can plug it into the PS4 USB for power so it starts with the PS4, connect to the exploit using the User Guide link, run the exploit, and if you want to shut the PI down safely you can connect via Android App (JuiceSSH) or PC to power the PI down.

Issues:
First - what do we need to register and be able to post links?
Second - friend who got this working needs to decide whether to post instructions or the SD card image

Can anyone point me at the latest files so I can change the PI to some nice looking backgrounds/buttons? currently looking fairly bland.

I cannot even post an image to show how it currently looks.

 

[corsasri]

If you can send me a link to your sd card image i can download and test

 

[PSXHAX]

Can any one supply a working link as there all dead.

I added a Mirror #2 to the OP now.

 

[corsasri]

Ok so i need a bit of help. how can i get this to work using a wireless connection. And the pi zero.

 

[corsasri]

We now have a working PI Zero W as an Access Point / Web-enabled host for PS4HEN (this means you can connect via wifi to the PI).

You can plug it into the PS4 USB for power so it starts with the PS4, connect to the exploit using the User Guide link, run the exploit, and if you want to shut the PI down safely you can connect via Android App (JuiceSSH) or PC to power the PI down.

Issues:
First - what do we need to register and be able to post links?
Second - friend who got this working needs to decide whether to post instructions or the SD card image

Can anyone point me at the latest files so I can change the PI to some nice looking backgrounds/buttons? currently looking fairly bland.

I cannot even post an image to show how it currently looks.

Please explain how you done it using wifi. or upload your image.

 

[MadBob]

​

This is the 'functional' frontend, going to post the PI SD Card Image as-is while still looking into editing it to make it look less ugly add some big buttons, also needs PHP to switch the PI off under another button.