PS4 Trainer Utility: Community Edition (TUCE) v0.9 by ZeroFox

Hi everyone, I have created a tool for this "modding" community, expanding on what's been done in this space.

I took out the horizon trainer file because it was actually nothing, just for demo purposes.

To start, not many people will recognize who I am because I am using a different alias. However, back in the Xbox 360 scene, I was the one who fixed up XPowerPlay by the2000 and the first person to release trainers for the 360.

Since then a lot of people approached me and I helped where I could, some of those people I encountered are even here now I believe (@DeathRGH, @vampirexx ?). That scene then took off and other people started making trainers.

That brings me to now, I've been watching the PS4 scene and what's been happening as far as memory and "trainer" tools go, and I'm happy to see some progress has been made. So I've decided to make my own contribution and help out the community as I did with the 360.

Now I've been working on this tool for awhile now in my spare time (even before PS4Cheater), but my spare time has been sparse which is why it has taken me so long to get this tool out there. Although it may seem similar to other tools out there there is added value to this specific tool.

Let me introduce you to the PS4 Trainer Utility: Community Edition (TUCE). Works on both 4.05 and 4.55.

Main Features Include:

• Extensive searching capabilities: search for many different kinds of values (integers, floats, strings, etc.), while using different equality comparisons (bigger than, smaller than, value between, changed, unchanged, opposites such as NOT bigger than, etc).

• Built-in dynamic trainer editor and loader: Simple and intuitive, create trainers with ease AND run them all within the same tool. Using trainers is super easy that even non-experienced people can use (they're all buttons!, just click and go!)

• Other memory tools at your disposal: Poke memory, view memory, dump memory. Save address tables, add newly found addresses during to scan to a trainer with ease.

F.A.Q:

Q: Why is this slower scanning memory than PS4Cheater?

A: While I can't speak for how PS4Cheater works, I noticed that when I did the EXACT same scan side-by-side using TUCE and PS4Cheater, I got significantly more results with TUCE than PS4Cheater. With TUCE I got over 16k results while PS4 Cheater only gave me 4k on the same scan. I'm not sure why this is but I can attest that my method will give you EVERY single result based on your search.

Q: I'm running a trainer but x,y,z value is not changing, why?!

A: A lot of values are dynamically allocated and as such the address the value is stored in changes on every console reboot. In order to trace the value back to where it gets assigned we need a debugger, which is currently not available.

Special thanks to @g991 (aka Golden) for creating jkpatch, which this tool utilizes.

Screenshots:

Download:

• PS4 Trainer Utility v0.9.4.rar (0.17 MB - Changes)

This is an ALPHA release due so many variables that I could simply not test every single scenario. If you do come across any bugs or issues, or even any feature requests, please let me know and I will do my best to provide support.

Thanks,
-ZF

Game Trainers:

• Final Fantasy XVI (CUSA01615) v1.00 by imedox

 

[ZeroFox]

Update 0.9.2.1 *HOTFIX

• Fixed Custom Range not working @PJoey

Download:

PS4 Trainer Utility v0.9.2.1.rar

Update 0.9.2

• Memory scans will now skip over any blocks of memory that can't be read. This will prevent the tool from crashing/hanging mid-way or at the end. For example, there is an issue reading the memory block: SceGnmDriver. The tool will detect an issue reading that block and will skip over it. IF there are any errors with the scan, at the end you will receive a pop-up (screenshot) with how many errors there were and you can then go to the "Error Log" tab (new)(screenshot) to read more about it.
• Updated the dedicated range descriptions to now include size, range and their prot flag as per a request.

 

[PSXHAX]

@ZeroFox Updated the OP and removed the old versions as requested.

 

[Pretinaverse]

@ZeroFox
The error show again and i was forced to close the application
Tested with Horizon Zero Dawn.

​

And also is the problem with "Next scan". Did you see it? I selected only one section for testing purpose. First scan took 30-40 seconds. Next scan took almost 2 minutes. I don't know if this is normal or not.

By the way, in scan type, i only see "exact value", "bigger than", "smaller than", and "value between". I don't see the other options you said: changed, unchanged, increased by, etc...

​

Crap!! I was just writing this and see the notification of a new message. There i discover the new version 0.9.2.1. I'm going to try it now, but I'll still leave this over here, just in case.

@ZeroFox Tested the new version and the same thing happens.

​

Oh, an you intend to make a section for editing the addresses without the need of creating a trainer? For games with dynamic addresses.

And what about editing values in decimal instead of hexadecimal

I know... maybe i'm asking too much, but the application looks good with every update and i really want this as my only option XD

 

[sushixxx]

HELL YEAH! overly excited here.. lol thank for your work.

 

[PSXHAX]

@Pretinaverse check the Announcements, posts are no longer automerged due to an add-on conflict discovered this weekend.

I manually merged your previous two posts, but from now on we're keeping the latter post so to be safe I'd include whatever is in the older posts in the latest.

 

[Pretinaverse]

Here i am again

Thanks @PSXHAX for the clarification. From now on, if i have something to say, i'll wait until someone else post something then

@ZeroFox
I kept thinking about the problem of the application closing down. I saw your screenshot and thought it must be some kind of problem with my computer. Then I remembered other times when I've had problems with an application and, most of the time, it was a compatibility issue.

I have windows 10, so I went to the application properties and changed it to windows 7. So I did a full scan and now it worked as it should.

​

 

[PSXHAX]

That works too, at least until a better work-around or fix is sorted.

I contacted the developer for the add-on tonight, but it looks like he hasn't been online in awhile so we'll see what happens.

 

[dyceast]

This community rocks ! Brings back so much memories of when the ps3 got hacked.

 

[imedox]

Thanks for this great work in the last version i can't see all name of the list and wat about freez the value ? and ther is bug if i add more then 4 code in trainer editor...
well it work great and TOO FAST !

​

 

[Pretinaverse]

@imedox
To freeze a value, use toggle button in trainer