faramibara13
Contributor
Hello all!
First, I would like to apologize to all readers for my bad English.
So as topic state i have a problem downgrading PS3.
What i do so far: N.B. its not my first downgrade.
1. Dump nor files.
2. Validate it. All is OK
3. Patch it with last patcher. All OK.
4. When i uploaded patched dumps, suddenly flasher start blinking (1st and last 3 blue lights)
5. I disconnected the console, check connection - all was OK
6. Patch my second dump, but when i started the console it turns off immediately with one yellow and several red blinking lamps. Its continue blinking red till the moment i did not hit power button again.
7. I soldered GND and SBE and flashed one of my original Backups.
8. Cut the wire and console is now on, but there is no signal and can not get to recovery menu. When i hold down power button it shut downs.
9. Last thing i do was to reflow the GPU, but problem stay. No video, no recovery. Just solid green light...
Any suggestions are welcome
Many thanks!
Toni
First, I would like to apologize to all readers for my bad English.
So as topic state i have a problem downgrading PS3.
What i do so far: N.B. its not my first downgrade.
1. Dump nor files.
2. Validate it. All is OK
3. Patch it with last patcher. All OK.
4. When i uploaded patched dumps, suddenly flasher start blinking (1st and last 3 blue lights)
5. I disconnected the console, check connection - all was OK
6. Patch my second dump, but when i started the console it turns off immediately with one yellow and several red blinking lamps. Its continue blinking red till the moment i did not hit power button again.
7. I soldered GND and SBE and flashed one of my original Backups.
8. Cut the wire and console is now on, but there is no signal and can not get to recovery menu. When i hold down power button it shut downs.
9. Last thing i do was to reflow the GPU, but problem stay. No video, no recovery. Just solid green light...
Any suggestions are welcome
Many thanks!
Toni