Join Us and become a Member for a Verified Badge to access private areas with the latest PS4 PKGs.
Status
Not open for further replies.
So here is a tutorial by me (nzie aka @pearlxcore) to upload your custom PS4 Playground into ESP8266 (I use treyjazz's file as sample).

WARNING : THIS TUTORIAL IS FULL OF IMAGES FOR YOUR UNDERSTANDING :ROFLMAO::ROFLMAO:

What you need :
Instruction :
  • Install Arduino IDE
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 1.png

  • Once installation is done, go to File -> Preferences
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 2.png

How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 3.png

  • Go to tools -> Board -> Boards Manager
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 4.png

  • Scroll down until you see ESP8266 and click install
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 5.png

  • Make sure you selected 'NodeMCU 1.0 (ESP-12E module)
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 6.png

  • Navigate to C:/Users/you-username/Documents/Arduino, make a new folder named 'tools'
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 7.png

  • Inside 'tools' folder, extract 'ESP8266FS-0.2.0.zip' content so the directory will be like this -> C:\Users\your-usename\Documents\Arduino\tools\ESP8266FS\tool\esp8266fs.jar
  • Now you have installed ESP8266 library and sketch uploader
  • Restart Arduino IDE
  • Extract treyjazz's PS4Exploit files somewhere in your pc
  • Go to Files -> Open -> navigate to the extracted files folder and select PS4Exploit.ino
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 8.png

  • Make sure you select the right board, flash and port in 'Tools' tab
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 9.png

  • Now click on 'ESP8266 Sketch Data Upload'
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 10.png

  • It will compile the code and files. Wait until the progress reach 100%
  • Go to 'Sketch' and click on 'Upload'. Wait until the progress reach 100%
  • Once done you can take out ESP8266 and reinsert back to USB port.
  • Now you can test the device.
  • Note that in this tutorial, the ESP8266 signed with :
IP : 10.13.37.1
SSID : ps4exploit
Password : hackmyps4
  • You can change these in the code
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 11.png

  • For PS4 network setup, choose wifi (custom) and connect to ESP8266
IP : any
SUBNET : 255.255.255.0
GATEWAY : 10.13.37.1
DNS : 10.13.37.1

Credit to treyjazz

Spoiler
 

Comments

Up to and including FW 5.05, creating PS4 playgrounds on an ESP8266 using these instructions always worked well for me. With the jailbreak for FW 6.72, which currently (or possibly in the future) far exceeds the 4 MB storage capacity, gzip should provide a way to somehow compress this data and store it on an ESP8266 module with 4 MB storage capacity.

Is there a simple guideline for this, based on the knowledge of this guide? I am grateful for every hint that puts me on the right track. Thanks in advance.
 
Status
Not open for further replies.
Back
Top