PS4 v5.05 Self Host & ESP8266 Exploit Playground Updates by Zoilus

OK FINALLY did a pretty BIG update. Self Host is now updated to v3.0b followed by v3.1 and the ESP8266 version is updated to v2.7 firmware only and v2.7 complete with lots of stuff added.

Github for Full host version:

• https://github.com/KMZoilus/KMZ505KEX

Github for ESP8266 Version:

• https://github.com/KMZoilus/KMZ_505_ESP8266

From the KMZoilus KMZ505KEX README.md: Playground v3.0b Update

1. Fixed - ApptoUSB v3.0
2. Fixed - HEN + Bin Loader
3. Added - Vortex Hen + VR
4. Added - USB FPKG v1.1
5. Added - BO3 Online
6. Added - DB Restore v2.0 and DB Restore UNDO v2.0
7. Added - GTA Menus page
8. Added - All of the following GTA V menus:
   • Arabic Guy V1.1 for GTA on V1.00
   • Lamance v0.8 for GTA on update v1.27
   • Last Team Standing v1.0 (LTS) for GTA on update v1.27
   • NotAnotherMenu v0.2b for GTA on update v1.27
   • NotyourDopes v1.0 for GTA on update v1.27
   • WildeModz v1.2 for GTA on update v1.27
9. Made various tweaks and changes to info & description page, layout, icons...etc

And from the KMZoilus KMZ_505_ESP8266 README.md: Arduino ESP8266 mini board version UPDATE v2.7

1. Fixed - ApptoUSB v3.0
2. Fixed - HEN + Bin Loader
3. Added - Vortex Hen + VR
4. Added - BO3 Online
5. Added - DB Restore v2.0 and DB Restore UNDO v2.0
6. Other various tweaks and changes and updated info & description page

Set up instructions - (nodeMCU pyFlasher 3.0)

1. Download latest from here: https://github.com/marcelstoer/nodemcu-pyflasher/releases
   
   
2. Install, then Run
   
   
3. Plug in your ESP board. You can hold down flash button as you plug it in but its not needed with this program
   
   
4. Choose correct com port, browse location for wherever you put the "bin" files you download from here and select. Firmware_only.bin is just the admin firmware, after installing you can log in and via browser on your device upload any files (self host) you want. Complete.bin installs the firmware AND the KM.Z Exploit (you can always delete the files later and or add to them)
   
   
5. Set baud rate to: 115200, Flashmode to: Dual I/O (DIO), and "yes, wipe all data", then press "flash nodeMCU" this ONLY flashes the main firmware/sketch to the ESP. When its done it will say so. unplug the ESP then plug it to any powered usb source (even the ps4), after plugging it in, press and hold "reset" on the esp for like 3 seconds, let go and wait a few seconds.
   
   
6. Use any wifi device with browser , log into the ESP using credentials at top of this page, then in device's browser type: "http://10.1.1.1/admin.html" without quotes, you should see the admin page of the ESP.
   
   
7. If you uploaded the "complete.bin" go to "main page" and the exploit should load. If you only did firmware, then it will have a plain payloads page loaded until you up load proper files using the file manager.

How to use once fully flashed

1. Plug ESP to ANY usb power sorce (doesn't have to be PS4), go to network, set up internet connect, custom, PS4_KMZ_ESP, password is password , set everything to automatic. Done, go to user guide and the 5.05 exploit's playground main index page should open if you used the "complete.bin" or if you've upload your own self host files proper.
   
   
2. After you run Vortex HEN once, your browser will be permanently enabled. I also suggest you run "update blocker". At this point you should reboot ps4.

If after reboot you don't see browser on home screen, go to the "library" section of the ps4 on main screen all the way to the right, look for the browser and start it, close it , it should now be on your home screen from now on.

Also to access the exploit once browser is enabled, just type http://10.1.1.1 (or ANY address) and the browser will always default to your ESP Exploit index page. Of course this is only when the ps4 is connected to the esp via WIFI. You can now bookmark that page

Whenever you run the admin option from the ps4 many options will not function and just kick back errors BUT you can change the "config editor" from the ps4, changes will happen immediately though!

You can access the "admin" of your ESP from any browser as long as that device is connected via wifi to the ESP. You can type 10.1.1.1/admin.html or just 10.1.1.1 (or ANY site) on the browser then pick the Admin panel from the exploit.

When on the PS4 if you are running ADMIN I would suggest BEFORE you run a payload or exploit , that you do it from the MAIN Exploit's Playground Index page and NOT from the Admin's "main page" located in the little upper left window. Exploits should still work fine but it may cause less of a problem that way.

For more info on exploit go to: https://www.psxhax.com/threads/ps4-internal-webserver-project-for-esp8266-d1-mini-by-stooged.5740/

Many thanks to ALL devs involved in all PS4 projects and Stooged and KiiWii in particular!

Full self host version (latest):

ESP8266 Version (latest):

 

[Zoilus]

@demonfish yeah, you're pkg's will install with any hen regardless how you backed it up, as long as the back up was done properly.

Updated My 5.05 Exploit Playground to v3.3 - Added Lotus mod menu for GTA V on v1.27 (thanks @Leeful !!)

Also made an "alternate" version of the exploit with different backgrounds and music with controls on the GTA page. Plus some other minor changes.. go to my github and read the update changes and download ....

https://github.com/KMZoilus/KMZ505KEX

here's some pics of the alternate version:

​

 

[Simon Wahlgren]

When do usually new jailbreaks come out, i'd really like to jailbreak my ps4, but it's on 6.02, is there any way for me to jailbreak my ps4? please help me!!!

I'd really like to mod rdr2 and Tomb raider When does the 6.02 comes out, (exploit in order to jailbreak) ? / Simon

 

[mawhatt]

Hope this isn't standing on any toes. For anyone wanting a fix for the Vortex + VR issue the index file has a small typo. You can download the fixed index.html files below depending on your version.

• Version 2.7
• Version 2.8

To replace the index file follow the steps below.
1. Connect to the ESP device with your computer
2. Browse to 10.1.1.1/admin.html
3. Click File Manager down the left hand side
4. Locate index.html and click delete
5. Click File Uploader down the left hand side
6. Click Select Files and browse to the index.html file you downloaded
7. Click Upload Files
8. Reset you ESP and test.

For anyone wanting to fix the index file themselves the typo is on line 12
REPLACE

<a href="./payloads/vortxhenvr/vortexhenvr.html"><img src=

WITH

<a href="./vortexhenvr.html"><img src=

I am sure this will be fixed in the next version but if you are like me and couldn't wait this may help you.

 

[Zoilus]

@Simon Wahlgren probably never... seriously I mean there wasn't even one for 5.50 or 5.55. Not to mention its not that easy. Its not like turning on a light bulb... sometimes when they patch a sysem, it may never be hacked. I will be super shocked if 6.0x ever gets end user hacked.

the key words are End user!

@mawhatt huh , can't believe I missed that. I will fix later and re-upload

 

[mawhatt]

@Zoilus No worries simple mistake your work is awesome keep it up.

 

[Zoilus]

5.05 Exploit for ESP8266 have been fixed. Vortex hen + VR now launches properly in both versions:
v2.7b and v2.8b

 

[demonfish]

@Zoilus Really appreciate your work, time and support Mate! Thank you.

Best Regards,

 

[Danielx02]

I think black ops 3 online no longer works since dmca takedown.. I cant get it to work, I get message that its offline when I try to start up a lan game. Anyone else getting this?

 

[kikok]

thank you @Zoilus

can i host this file without ESP device?

 

[foxangil]

thanx @Zoilus
can i use this files with web server