Category PS4 Guides and Tutorials       Thread starter GreenSmoke       Start date May 19, 2018 at 12:27 AM       31,111       84            
This tutorial covers how to flash an ESP8266 device with a bin file using a windows PC for use on a PlayStation 4 console.

What you will need:
  • A ESP8266 with 4MB Flash
  • A Micro USB cable
  • A Windows PC
  • A Bin File containing ESP8266 Firmware
  • (A PS4 with Firmware 4.55 is required if you want to use RetroGamerFirmV3 !!!)
1- First download the correct drivers for your system, I got the driver for windows 8.1 you can find the right one HERE.

2- Download the correct Nodemcu-Pyflasher for your system. Im using the x64.exe, you can download it HERE if you do not know what one to download check in control panel (Control Panel\System and Security\System and look for System Type)

3- Then of course you will need a bin file to flash to your ESP8266. I will be using retrogamerfirmv3.bin to enable the web-exploit on a 4.55 PS4, but you should be able to flash any bin file using the same method. You can get RetroGamerFirmV3 HERE.

You could also flash your ESP8266 to be used as a Deauther to disconnect people from their wifi network you can find that HERE.

4- Install the correct driver for your system, run the installer, click next select "I accept the agreement" and next again, click finish.

5- Run NodeMCU-PyFlashe, select the serial port im using port 3, click browse and select your firmware.bin file you want to flash to your ESP8266, select your Baud Rate i'm using the fastest with no problems, you can try a lower speed if you like or if it will, select to erase flash by clicking "yes, wipe all data" not work, finally click flash NodeMCU, wait. You can see the progress in the program, one you see done that's it your ESP8266 is ready to use.

If you flashed the PS4_RetroGamerFirmV3 firmware to your ESP8266, on your PS4 go to Settings / Network / Set Up Internet Connection / WIFI / Custom / PS4_Wifi / IP = Auto / DHCP = Do Not Specify / DNS = Manual / Set Primary and Secondary DNS to: 10.10.10.1 / MTU = Auto / Proxy = Do Not Use.

Download: c0d3m4st4_ESP8266XploitHost_v2.2.zip (2.0 MB)
Download: c0d3m4st4_ESP8266XploitHost_v2.71.zip (2.8 MB)
Download: c0d3m4st4_ESP8266XploitHost_v2.81b.zip (5.4 MB)

Download: Draqen-Esp8266-fw455.bin (4.0 MB)

New version 1.10 for my bin esp8266 for fw 4.55:
  • Add new interface.
  • Add payload linux.
  • Add payload Only VR (No hen).
  • Add update payload hen.
  • Fix payload hen+VR
:alert: Note from matias3ds: Not all the USB cables are recognized for Esp2866, many of them will give power you will see the led light turn on and off but your computer wont recognized that the Esp2866 is connected, try with different cables !!!
How to Flash an ESP8266 PS4 Device on Windows Guide by GreenSmoke.jpg
 

Comments

Keeperdy

Developer
Senior Member
Contributor
Verified
I also made a light and simple firmware for esp with ps4 4.55 exploits, it has automatic "easy" wi-fi settings and all necessary payloads. If someone interested, you are welcome!

NETWORK SETUP:
Now choose "Easy" method in Wi-Fi connection settings.
  • Network: PS4
  • Password: qwertyuiop
That's all!! You are connected! "Test internet connection" also passes successfully with such settings!

Project on Github.
Download - LINK
 

matias3ds

Senior Member
Contributor
I have the esp running with one problem , maybe somebody could help. I need to load Original Payload everytime I want to use ps4 cheater.

Original payload opens the port 8020 so the pc with the ps4cheater can connect with the ps4. But if I hit Original payload from the esp it pops a message, no internet connection !!!

Because of course the esp doesn't have internet connection. Is there a way or a configuration that I can use to load the Original payload from the esp ????
 
Recent Articles
PlayStation 5 User Interface (PS5 UI) Rumored Image Leak Surfaces
An image that is rumored to be a screenshot of the current PlayStation 5 User Interface (PS5 UI) has reportedly leaked by an Anonymous game studio employee on the popular 4Chan bulletin board. 🤩...
Frost4 (PS4 Frostbite Engine) Toolkit & GNMF (BA2) Tools by SockNastre
Recently developer SockNastre made available on Github both a Frost4 Toolkit for modifying the proprietary Frostbite engine on PS4 alongside some BethesdaArchive2 GNMF tools to read / write in...
Grand Theft Auto V (GTA V) ArabicGuy Mod Menu for PS4 2020 Demo
Following the ArabicGuy v1.1 GTA V Mod Menu by @RF0oDxM0Dz and the Ghosts 1.00 SilentShadowV3 Mod Menu, PlayStation 4 scene developer @CustomHooker shared on Twitter a new Grand Theft Auto V (GTA...
PS4: The Best Place to Play Showcases Exclusives in Latest TV Spot
Sony's latest PS4 promotional TV spot titled The Best Place to Play can be seen below, and spotlights some current and upcoming PlayStation 4 exclusive games including The Last of Us: Part II...
Top