Category PS4 Guides and Tutorials       Thread starter pearlxcore       Start date Apr 2, 2018 at 1:45 AM       39,554       140            
So here is a tutorial by me (nzie aka @pearlxcore) to upload your custom PS4 Playground into ESP8266 (I use treyjazz's file as sample).

WARNING : THIS TUTORIAL IS FULL OF IMAGES FOR YOUR UNDERSTANDING :ROFLMAO::ROFLMAO:

What you need :
Instruction :
  • Install Arduino IDE
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 1.png

  • Once installation is done, go to File -> Preferences
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 2.png

How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 3.png

  • Go to tools -> Board -> Boards Manager
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 4.png

  • Scroll down until you see ESP8266 and click install
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 5.png

  • Make sure you selected 'NodeMCU 1.0 (ESP-12E module)
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 6.png

  • Navigate to C:/Users/you-username/Documents/Arduino, make a new folder named 'tools'
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 7.png

  • Inside 'tools' folder, extract 'ESP8266FS-0.2.0.zip' content so the directory will be like this -> C:\Users\your-usename\Documents\Arduino\tools\ESP8266FS\tool\esp8266fs.jar
  • Now you have installed ESP8266 library and sketch uploader
  • Restart Arduino IDE
  • Extract treyjazz's PS4Exploit files somewhere in your pc
  • Go to Files -> Open -> navigate to the extracted files folder and select PS4Exploit.ino
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 8.png

  • Make sure you select the right board, flash and port in 'Tools' tab
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 9.png

  • Now click on 'ESP8266 Sketch Data Upload'
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 10.png

  • It will compile the code and files. Wait until the progress reach 100%
  • Go to 'Sketch' and click on 'Upload'. Wait until the progress reach 100%
  • Once done you can take out ESP8266 and reinsert back to USB port.
  • Now you can test the device.
  • Note that in this tutorial, the ESP8266 signed with :
IP : 10.13.37.1
SSID : ps4exploit
Password : hackmyps4
  • You can change these in the code
How to Upload a Custom PS4 Playground Into ESP8266 Guide by Nzie 11.png

  • For PS4 network setup, choose wifi (custom) and connect to ESP8266
IP : any
SUBNET : 255.255.255.0
GATEWAY : 10.13.37.1
DNS : 10.13.37.1

Credit to treyjazz
 

Comments

Mekkiveli

Senior Member
Contributor
Verified
Hi i have a ps4 with 1.76 firmware, i flashed my esp6288 with your files and i get this.

can you please help me.
Code:
Arduino : 1.8.4 (Windows 7), Carte : "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 4M (3M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200"

[SPIFFS] data   : C:\Users\Alex\Documents\PS4\ESP8266\PS4Exploit\data
[SPIFFS] size   : 3052
[SPIFFS] page   : 256
[SPIFFS] block  : 8192
[SPIFFS] upload : C:\Users\Alex\AppData\Local\Temp\buildd4a98a79dbc8ad16348a5a24cf5af3bd.spiffs/PS4Exploit.spiffs.bin
[SPIFFS] address: 0x100000
[SPIFFS] reset  : nodemcu
[SPIFFS] port   : COM3
[SPIFFS] speed  : 115200

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_send_command: wrong direction/command: 0x00 0x08, expected 0x01 0x08

warning: espcomm_sync failed

error: espcomm_open failed

error: espcomm_upload_mem failed

SPIFFS Upload failed!
 

Alelec

Member
Contributor
Hello. I'm on PS4 1.76 with ESP8266 but it doesn't work. I tried to change local_IP by "10.10.10.1" but the ESP didn't found on Wi-Fi (not detected). This is the screenshot :


Finally, it seems to be "Al-THINKER_00BEA2" instead of "PS4wifi" or something... Why the name is different ? Then, I have to type the DNS and the port com... I will try...
 
Recent Articles
PS4 Syscon Loader Python Script for System Controller Files by SocraticBliss
Following the PS4 SysGlitch Tool and SysCon Glitching Pinout and his PS4 Unfself Tool, today PlayStation 4 developer @SocraticBliss is back with a PS4 Syscon Loader via Twitter tested with the IDA...
XNA RPKGMAN: XNA Remote Package Manager by Cypheron
Hey everyone, following PS4 PKG Sender v1.03 I have created XNA RPKGMAN: XNA Remote Package Manager which is a fully dynamic, lightweight package manager that only requires NodeJS/NPM and runs on...
Bad_Hoist PS4 Toolchain Porting Guide for Unsupported Firmware by Sleirsgoevy
Proceeding his PS4 ROP 8CC Port, Bad_Hoist 6.72 PS4 Webkit Exploit Port and preliminary Checklist to Port the Toolchain, today PlayStation 4 developer sleirsgoevy updated his Github repository...
PS4GDB Ring 0: GDB Stub to Debug PS4 Kernel by M0rph3us1987
Last month he shared a GDB Stub PS4 Port to Debug Userland Apps, and today PlayStation 4 developer m0rph3us1987 returns with a gdbstub_ring0.bin payload which is a PS4GDB Ring 0 GDB Stub for PS4...
Top