GamerAbei
Contributor
Cheers! I have a multimeter, ma man!
And I did try to measure the voltages.
Maybe I didn't do it correctly, I can't really guarantee I measured them the proper way, but, it is this way:-
Check the voltages above, see if they are correct. And also, tell me how to measure the voltages, in case I did it wrong.
I am really bending towards the conclusion that there's either a short in the motherboard (which there never was, but still, maybe now there is) or, the two wires that I connected behind should be connected somewhere else.
And I did try to measure the voltages.
Maybe I didn't do it correctly, I can't really guarantee I measured them the proper way, but, it is this way:-
- Point 1 (Power) = 5.9v
- Point 2 (Ground) = 0v
- Point 3 (Something) = Ov on standby, but when power button is switched on, it goes to 3.3v
- Point 4 (Standby) = 5.3v
Check the voltages above, see if they are correct. And also, tell me how to measure the voltages, in case I did it wrong.
I am really bending towards the conclusion that there's either a short in the motherboard (which there never was, but still, maybe now there is) or, the two wires that I connected behind should be connected somewhere else.