Earlier this week we saw a decked out PS4 AIO Offline 5.05 Exploit Playground, and recently CelliesProjects made available what he calls PS4Brew 5.05 for ESP32 and ESP8266 devices in 5.05 jailbreaking aimed at PlayStation 4 minimalists.
Prior to PS4Brew 5.05 for ESP32 / ESP8266, he's also used ESP8266 boards for other projects including an ESP8266 Temp Server with further details and pictures on his Dutch blog.
Download: esp32-ps4-jailbreak.ino.esp32.bin / esp32-ps4-jailbreak-master.zip / ESP32 GIT / ESP8266-ps4-jailbreak-master.zip / ESP8266 GIT
Those giving it a try may want to grab the Latest PS4HEN version, and from the README.md to quote: esp32-ps4-jailbreak
This is a minimal implementation of the PS4 hack by qwertyoruiopz. It only contains the 'PS4HEN v1.6'.
You will need an ESP32 board with 4MB flash memory and a PS4 on fw 5.05 to use the software.
How to flash your ESP32:
Using Arduino IDE:
Specter, IDC, qwertyoruiopz, Flatz, CTurt, Mistawes, XVortex, Al-Azif
And to quote from the other README.md: esp8266-ps4-jailbreak
This is a minimal implementation of the PS4 hack by qwertyoruiopz. It only contains the 'PS4HEN v1.6'.
You will need an ESP8266 board with 4MB flash memory and a PS4 on fw 5.05 to use the software.
How to flash your ESP8266:
Specter, IDC, qwertyoruiopz, Flatz, CTurt, Mistawes, XVortex, Al-Azif
Prior to PS4Brew 5.05 for ESP32 / ESP8266, he's also used ESP8266 boards for other projects including an ESP8266 Temp Server with further details and pictures on his Dutch blog.
Download: esp32-ps4-jailbreak.ino.esp32.bin / esp32-ps4-jailbreak-master.zip / ESP32 GIT / ESP8266-ps4-jailbreak-master.zip / ESP8266 GIT
Those giving it a try may want to grab the Latest PS4HEN version, and from the README.md to quote: esp32-ps4-jailbreak
This is a minimal implementation of the PS4 hack by qwertyoruiopz. It only contains the 'PS4HEN v1.6'.
You will need an ESP32 board with 4MB flash memory and a PS4 on fw 5.05 to use the software.
How to flash your ESP32:
Using Arduino IDE:
- Download AsyncTCP and ESPAsyncWebServer and install these libraries in the Arduino libraries folder. Restart the Arduino IDE after this step.
- Unpack the latest release zipfile.
- Flash the compiled software to your ESP32.
- Flash the pre-compiled esp32-ps4-jailbreak.ino.esp32.bin file to 0x00010000.
- Use this command (Linux) to flash the binary to an esp32 with a default partition table:
~/Arduino/hardware/espressif/esp32/tools/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m 0x10000 esp32-ps4-jailbreak.ino.esp32.bin
(you might have to adjust some things for your particular board)
- The ESP32 will start an accesspoint named ESP32 5.05 jailbreak server.
- Connect to this AP with your PS4 and browse to http://192.168.4.1/ to enable PS4HEN on your PS4.
Specter, IDC, qwertyoruiopz, Flatz, CTurt, Mistawes, XVortex, Al-Azif
And to quote from the other README.md: esp8266-ps4-jailbreak
This is a minimal implementation of the PS4 hack by qwertyoruiopz. It only contains the 'PS4HEN v1.6'.
You will need an ESP8266 board with 4MB flash memory and a PS4 on fw 5.05 to use the software.
How to flash your ESP8266:
- Download ESPAsyncTCP and ESPAsyncWebServer and install these libraries in the Arduino libraries folder.
- Restart the Arduino IDE after this step.
- Unpack the latest release zipfile.
- Compile and flash the software to your ESP8266.
- The ESP8266 will start an accesspoint named ESP8266 5.05 jailbreak server.
- Connect to this AP with your PS4 and browse to http://192.168.4.1/ to enable PS4HEN on your PS4.
Specter, IDC, qwertyoruiopz, Flatz, CTurt, Mistawes, XVortex, Al-Azif